Release Notes/Solved items Version 2023.1

RadiMation version 2023.1.8

• #13843: AD-Converter Keithley (Scanner) shows error -133 undefined header on the display.
• #13847: Timeout error when using filter 12
• #13853: Events are not shown in the events tab of a multiband radiated immunity test
• #13864: RE MB test window - peaks tab is broken
• #13869: Conducted Emission MB test is raising a object reference error
• #13863: Driver: Amplifier Research FL8018 + FI8000

RadiMation version 2023.1.7

• #11939: Differences in the behavior of the shown test events between Singleband and Multiband
• #13426: TDEMI repeats measurement on frequency step for several times
• #13556: Driver: FPP 2,3/1.5 support for the Maturo FCU3.0 and NCD controller
• #13565: Readout of the TDEMI Gauss Ultra 6 seems to repeat the measured data
• #13599: AD-Converter Keithley (Scanner) shows error -133 undefined header on the display
• #13608: Editing in Note Tab not possible, only via "Note" button
• #13653: Saving the content of the note adds an additional newline character
• #13654: EUT information items should not allow items starting or ending with new line characters
• #13678: TDEMI U6 - Radiated Emission - measurement results contain noise not seen on the device.
• #13718: Different RBW values cannot be configured as expected because of auto completion of the value
• #13765: Driver: Lecroy WaveRunner 8038HD
• #13766: Driver: Keysight MSOS054A
• #13767: Driver: Lecroy HDO 6034-MS
• #13789: BB graph - setting of marker does not work
• #13792: Select another band after removing a band in a multiband test
• #13794: Cosmetic issues regarding the alignment labels in RI Multiband
• #13795: R&S ESR seems to hang when it starts a new scan in the 1GHz - 3GHz range but not in the 30MHz - 1GHz range
• #13800: Driver: Frankonia VLH-700B1
• #13801: Driver: R&S OSP320 switchmatrix
• #13804: Driver: ETS-Lindgren 7002-009
• #13812: Driver: Frankonia VLH coupler
• #13817: Auto filter is not available in the RadiPower RPR4000 series
• #13824: Cannot connect to Frankonia VLH amplifier
• #13825: Update DevExpress to 22.1.10
• #13827: GPIB delays
• #13831: about external square wave modulation
• #13833: Confirming a new to angle in the VI instrument windows by pressing enter does not result in movement
• #13837: Agilent 33521A: "Not all bytes are written to the GPIB-Board within the timeout period (GPIB: EABO)"
• #13840: Extend the Keithley 2000 with ethernet and visa.

RadiMation version 2023.1.6

• #13580: EP600 times out if the binary data returned contains a new line character
• #13666: Provide a more generic 'attenuator' and 'pulse limiter' device driver
• #13674: EMI Schaffner SCR3502 measures high peak values while measuring in the noise
• #13692: Invalid message when removing input from TSF
• #13709: TDEMI Cancel don't work in remote control
• #13744: Logging mode is not supported by this powermeter.
• #13748: Singleband Conducted immunity fixed voltage checks for a CI mill cal data document
• #13756: Include check in firmware update if RadiLink is connected to the external power supply
• #13768: Fixed step count stepper, only tests the first and last frequency of a band
• #13799: Graphline customizations are not remembered
• #13806: Signal power is sometimes empty in RI MB test result

RadiMation version 2023.1.5

• #13614: Firmware update of the RadiLink RLK3086R is not working because of differences in the software update protocol
• #13641: Automatic retrieval of Temperature/Pressure/Humidity sensors during start of test
• #13686: Table header are not included and symbols are not inserted into reports
• #13699: Connection Check Fail for Keysight N9038A
• #13707: SV: RadiMation object null reference error when using the export functionality
• #13716: RadiCentre version check Driver
• #13720 Test Keysight IO viFLush returning buffermask of value 128 using pre-release build
• #13721: Error in communication with Power meter
• #13723: When a RadiPower USB is unplugged from the PC, no error is shown in RadiMation
• #13727: Set the termination on read for the EP600 field probes
• #13728: EP601 Does not return correct field when using as ad input
• #13732: Amplifier goes in operate before zero off probe
• #13733: Correction of ep601 at 60 kHz is sent as 50 kHz
• #13751: Time out problem with the "EP 601" field probe
• #13782: RGN connection issue in USB controlled RadiCentre

RadiMation version 2023.1.4

• #8156: Auto discovery of RadiPower powermeters through the RadiMation device driver system API
• #11578: New directory name / description not remembered
• #12860: TSF file directories names are changed to "new directory-<index>"
• #13182: Driver: RadiPol antenna tower
• #13211: FPC1000 using the 'GTEM' test results in "Specific System Error: -113,"Undefined header" when selecting zero span
• #13236: Turn table angle in MK Messtechnik OSD
• #13248: Object null reference error during Radiated Immunity test while determining the input identifiers of the test level
• #13343: Multi-axis field probe read out
• #13375: Creating a sub TSF Directory with a new TSF file (network) results in an empty directory name with the file in the root directory
• #13410: Add a manual controlled XY positioner driver
• #13519: Windows error 128: There are no underlying child processes to wait for
• #13537: Radimation data storage error during test
• #13553: Issue 2023-04-04 AL3 Configuration AD-Converter Keithley (Scanner)
• #13564: Frankonia FC05 Polarization controller issue
• #13567: Update wxWidgets to 3.2.2.1
• #13577: Possibility to switch The FFT mode of the TDEMI
• #13582: Emission Graph as polar plot of angles
• #13594: Rohde & Schwarz SMB 100B: Not all bytes are written to the GPIB-Board within the timeout period (GPIB: EABO)
• #13595: Create a python module for an EUT Status interface
• #13600: Magnetic field test according ISO 11452-8 using CWS500N3
• #13603: Driver: RadiLink RLK3086R
• #13615: How to measure an ADC during singleband tests
• #13616: AD-Converter Keithley (Scanner) the first measurement returns 0V which is incorrect
• #13628: Final QP-Measurement not working for more than 1 Pre-Measured Peak due to the RBW being changed by the device
• #13633: Extend TCP/IP status interface to allow passing of TestInfo.
• #13639: Driver: TDEMI M7/M7+
• #13642: 'device driver function not implemented error' during Radiated immunity Calibration
• #13643: Name of new sub-folder in TSF selection window is lost
• #13644: Cannot execute isotropic field measurement using XYZ axis correction data
• #13647: CI test is levelling down with NSG 4070
• #13655: Rohde & Schwarz SMB 100A fault: Not all bytes are written to the GPIB-Board within the timeout period (GPIB: EABO)
• #13656: RadiPol 2010A cannot control tower height
• #13657: Antenne toren
• #13658: List FSA as 'FS Antennentechnik'
• #13659: single band external modulation depth setting
• #13660: Create antenna tower driver for the RadiPol
• #13661: Auto detect the RadiLink RLK3086R
• #13662: Attenuation/Gain system calibration cannot be used with carrier level below -50
• #13664: IF overload
• #13670: Radisense IV & Dare RSS1006A errors driver does not enable axis before taking measurements
• #13671: Error message during initialization of CXA N9000B signal analyzer
• #13672: RadiSense driver does not enable axis before taking measurements
• #13673: AR FM/FL field probe does not measure any field
• #13673: AR FM/FL field probe does not measure any field
• #13675: Object reference not set when referencing the input identifiers of the test site
• #13677: RadiSense IV returns E3 when setting the filter settings.
• #13682: Buttons for Add/Delete monitoring input in testsite configuration are shown too low
• #13683: HI6105 only returns the X axis measurement results
• #13684: Error 4 when retrieving field with RadiSense 4
• #13696: Reading RadiSense 18 is slow
• #13697: Graph line colours are not remembered
• #13700: too much reflected power
• #13701: Signal generator error - R&S SMB 100A
• #13704: Communication with a RSS1018 in a RadiCentre 1 is very slow
• #13705: EUT Status Controller does not require that the response starts with TESTINFO
• #13706: Update screens shows new major while already up to date
• #13708: No communication with RadiCentre possible
• #13719: Object reference not set to an instance of an object

RadiMation version 2023.1.3

• #13459: Wrong value when measuring single final average detector from FPC1500
• #13534: Performance problems in 2022.1.3
• #13539: RadiSense Error 3 on LASER? command
• #13547: Design calibration import tool
• #13548: Implement calibration import tool
• #13549: Extend the calibration import tool to also support Schaffner calibration files
• #13550: Build 2023.1.x including Calibration import tool
• #13551: Document and explain how to import the calibration files from another software package
• #13583: Settings.ini has been corrupted
• #13611: Frankonia FC06.1 connection issue when initializing multiple driver instances on the same control unit
• #13702: RadiMation does not display correctly on non HD resolutions

RadiMation version 2023.1.2

• #6003: Check if a newer software version is available during startup
• #11491: When using field monitor application, no correction factors were used, despite them being selected
• #13314: Possibility to start a sequence from the commandline.
• #13444: Auto detect from Configuration screen does not update window.
• #13457: & in drivers release notes is shown as & in update check window
• #13576: Probe laser disconnect when testing above 1000 V/m

RadiMation version 2023.1.1

• #12695: Rename FormattedLong to FormattedInteger, Add new FormattedLong using int64 longs
• #12947: RadiMation slows down the PC after updating
• #13047: Starting RadiMation by opening an EUT-file, results in RadiLog not being able to start when requested
• #13255: Calculated electrical field using horn antenna, shows different measurement values when a test file is reopened