Release Notes/Solved items Version 5.3

RadiMation version 5.3.21

• #2113: Keyword CALIBRATION FILE does not work with RI subst test reporting

RadiMation version 5.3.20

• #2971: Setting the puls setting to 0.5 uF is not remembered in the test.
• #3044: RI multiband ALL graphs key word does not work.
• #3133: dBpT/uV factor is not taken into account in the magnetic field test

RadiMation version 5.3.19

• #2930: limit line does not show during the merge function
• #2963: Crash when the R&S ESHS30 receiver is initialized
• #3012: the mode of operation is not inserted in the multi band emission test print out
• #3065: Why isn't average field data supplied during field probe calibration (X,Y & Z axis measurements are) at D.A.R.E!! Calibrations? What does Radimation require for calibration data?
• #3066: driver for LeCroy 9310AL
• #3069: Control of the turntable is not working correctly
• #3071: On emissions graph it reads dBuV and not dBuV/m depending on radiated or conducted

RadiMation version 5.3.18

• #2790: Wrongly measured reflected power during BCI-(fixed current)-tests
• #2873: Saving a TSF with a ':' in the name is raising errors
• #2878: Driver: Amplifiers
• #2886: Current is not displayed correct
• #2889: R&S ESPI: Data out of range during BCI Closed loop
• #2921: Combined Graph Report generator code is not replaced if the first mentioned graph is not available
• #2960: GPIB screen of the inco 2000 does not show
• #3006: Cal file is giving warning in sequence
• #3022: Error when trying to configure the R&S NAP driver.
• #3029: The limit line is missing in the table
• #3033: Report generation is giving the graphs I need
• #3074: Appears to be CR line feed errors in the notes / comments column of the performed tests table in the EUT Window
• #3101: Several problems with the HP 4395A driver
• #3104: Continuation of a Multiband immunity tests, starts with a too high signal generator level, causing overtesting
• #3113: Temporary bug to test defect creation
• #3127: Error message during initialisation of ESIB26
• #3165: Internal modulation of the Agilent 83640B is not correctly controlled
• #3228: FP4080 driver is crashing with 5.3.18.

RadiMation version 5.3.17

• #1890: Limitation on x-times the calibrated power is not easy to configure in multiband immunity
• #2144: Show related limit lines during measurement of trace in multiband emission
• #2980: NB/BB discrimination during CE and RE cannot be turned off
• #3110: Graph of an AD Channel from a Multiband immunity test cannot be included in the report

RadiMation version 5.3.16

• #1292: Time stamping of immunity frequencies
• #1608: Multiband emission should check the valid frequency range of all equipment during initialiation of the equipment
• #1873: If the name of the graph line is starting with '-' then the graph menu shows a caption
• #2178: Partially performed emission scan is not saved
• #2229: Detect peaks on the average detector sweep in multiband emission
• #2669: Show a table in multiband immunity with the data that is shown in the graph
• #2828: Measurement with the average trace detector, looses information of an already performed measurement of the peak trace detector
• #2834: RadiTurn raises an error 'already in progress'
• #2841: Emission measurement with a different detector erases already measured data of another detector
• #2854: Improvements in the read-out of the software protection key
• #2870: In the RE Chamber TSF, the 'General info' and 'Reporting' buttons are always disabled

RadiMation version 5.3.15

• #2133: Intermediate retrieved measurement 'blocks' from a scanning receiver are not updated in multiband graph
• #2332: When is the delete button active?
• #2339: Negative turntable angles are not allowed
• #2646: VZLAMP.dll is not installed during the set up
• #2677: adding device driver configuration in a protected config directory does not generate an error.
• #2784: Driver: CDN's for install Savonia
• #2831: Printing the graph from the multiband conducted immunity test raises an error
• #2836: Incorrect jig transfer factor is used for the calibration jig
• #2845: RadiSense driver does not work when used inside the radiCentre
• #2867: Power measurement crashes when the max power setting is above 10 times
• #2875: Agilent N5181A does not turn the Mod off

RadiMation version 5.3.14

• #2821: Driver crash when using Boonton 9200
• #2814: Driver: Amplifiers for 08D00011 Nato
• #2809: Report generator stops sooner then expected in excel report
• #2807: EUT specific information cannot be filled in for a newly created EUT file
• #2802: Test scripts do not report the amount of errors and warnings in the caption of the e-mail
• #2765: RADNI.DLL not supported anymore
• #2749: John deer text generator is crashing the software
• #2709: Frequency Offset of ESPC driver
• #2660: Legends of a graph line should only be shown if the graphline is really visible in the graph
• #2103: Upgrade Code Block Ide so we can use the --rebuild in the command prompt
• #2100: Upgrade wxWidgets library to use version 2.8.0
• #1829: During the measurement, only the Both-Peak-Max-Graph should be visible.
• #1687: Report generation slow (on hyperthreading/multiple CPU)

RadiMation version 5.3.13

• #2813: Coupler driver needed for Rockwell Collins
• #2801: Radiated immunity (single band) files are reported to be corrupted if they are opened directly after the test has been finished
• #2800: Graph lines of emission spectrum is not shown in generated report for multiband emission tests
• #2792: Software limits of antenna tower device drivers cannot be configured in the device driver
• #2785: R&S smiq driver is not waiting for the power to be leveled.
• #2782: Driver: ESD guns for install Savonia
• #2781: Driver Antenna for install
• #2771: multiple Solartron 7150 ad convertors in one
• #2757: Double click on the name of the engineer doesn't allow to edit the details
• #2748: removing amplifier correction file from signal input is not easy when the file is no longer available
• #2708: Driver: Agilent N9310A
• #2707: RadiPower Numbering is wrong
• #2676: Multiband with virtual devices, zero delay time internally, is taking more then 20 min to run
• #2353: Multiband emission is too slow
• #2227: Graph update is delaying the measurement.
• #1848: CPU usage is at the beginning of the test at 20-30% and after some steps at 100%
• #1836: A request to the user, if the software should really be closed before the program is closed.
• #1754: Multiband: Spectrum analyser specific settings can be changed when a (scanning) receiver is selected
• #1674: Emission test do not report out of range device like immunity test do

RadiMation version 5.3.12

• #2772: frequency checking in GTem test.
• #2743: Report generator doesn't replace code in first row of table
• #2724: Report generator should replace the complete paragraph if ||InsertFile(...)|| is used
• #2718: Report generator code is not replaced, if the contents of the document are changed
• #2651: reading back the information of the harmonic test is crashing due to file synchronization

RadiMation version 5.3.11

• #2760: Conversion to and from pF is not correct
• #2677: adding device driver configuration in a protected config directory does not generate an error.

RadiMation version 5.3.8

• #2264: Driver: Werlatone C1795 not supported

RadiMation version 5.3.7

• #2736: Amplifier Signal Generator protection is not triggered
• #2729: FM 5004 does not remember the GPIB address
• #2722: Correction file is added to the field instead of multiplied in multiband RI test
• #2698: Correction file is not correctly using the selected precision of the unit
• #2485: opening and closing the config window of the new GNU driver for the ESI is draining resource.
• #2484: memory leak with lisn test and new driver ESI

RadiMation version 5.3.5

• #2705: Just created calibration files cannot be opened anymore by the same software version (5.3.3)
• #1977: Progress calculation of Immunity test is going to 101%
• #1643: Testlevel unit is not shown in RI Mil-Std Calibration when a new TSF is created

RadiMation version 5.3.4

• #2693: Title head is not the same as the filename
• #2691: Sql Filter on Test site some times works and sometimes it does not
• #2686: A python script to fastly change unit settings in all TSF files
• #2685: Filtering of columns in a report generator table using 'SELECT ...... FROM <CODE>' is not working if requested columns are not in the generated table
• #2684: antenne meting does not support RECEIVED POWER_RAW in the report.
• #2678: Multiband Immunity needs to have an antenna tower and turntable
• #2671: PM window multi band does not update the time correctly
• #2662: Report generator reports that peak conservation is used during pulse modulation
• #2661: Report generator doesn't correctly output used frequency step if a frequency list is used
• #2653: shutting down the analyser before stopping the test holds makes saving of the data impossible
• #1605: Multiband emission needs to have an antenna tower device in the testsite

RadiMation version 5.3.2

• #2640: CE Multiband test is giving ‘horizontal’ instead of the lisn line
• #2633: Button in the environmental data window to use the same value as the last test for all the parameters
• #2614: Question: Which value for ALC is set inside the Kalmus 757LC?
• #2613: Report generation is slow when codes are included that are not present in the data file
• #2612: ||EUT|ENVIRONMENT|| is not replaced with the data in a report
• #2605: driver: Frankonia stripline, 90Ohm, 1GHz SR90/1000
• #2585: List of selected equipment is not sorted by default
• #2578: Radimation stops when not used for more then 10 minutes
• #2576: URV5 is returning measurement values in W instead of dBm
• #2572: Multiband immunity should ask on which location it should continue if automatic mode is enabled
• #2569: G-tem measurement is giving overflow error
• #2555: Driver ESN is not set up correctly
• #2549: Remove support for exotic report generator editors
• #2543: The port type selected in the cable configuration is not shown in the EUT window
• #2540: Crash when environmental data button is clicked in the TSF that is included in a sequence
• #2537: What is the usage of "Check Extension" in the report generator
• #2534: Typing error in manual mode window
• #2531: AR PM 2002 gives an 'Unknown Error' after zeroing
• #2530: driver: Schaefer Controller (Turn Table + changing polarisation)
• #2528: Environmental Data is some times not asked before testing
• #2523: Forward powermeter is not included in test initialization of a multiband immunity test
• #2518: Multiband frequency list is not taking the unit of the frequency column into account
• #2497: trying esi 40 driver on esi 26 is crashing the software.
• #2495: R&S ESI series analyzers hold the GPIB bus, so a GPIB delay should be used between GPIB calls of different device drivers
• #2490: Environmental data is empty when test results are reopened
• #2481: driver: NI-6221 DAQ card
• #2480: driver: NI-PCI-6014 Analog DAQ
• #2444: Include A/m as unit for magnetic flux density
• #2441: Measure more then 100 sweeps
• #2439: Possibility to select multiple cables/attenuations for a cable in the test-site
• #2322: Multiple correction files for RE chamber test
• #1837: Measure more then 100 peaks.
• #1444: Perform Immunity test from high to low frequency (Reverse frequency sweeping)
• #663: Turntable support in Radiated Immunity
• #484: Frequency steps per decade or frequency steps per octave not possible
• #285: Advanced Data Shower om alle data in de Test files te tonen

RadiMation version 5.3.1

• #2637: Driver PMM 8053A
• #2519: CE current probe test is hanging after the taking a sweep with a receiver
• #2517: Correction file limits values in frequency column to 40000 even if it is 40000 kHz

RadiMation version 5.3.0

• #2559: Reflected power limited when cable to antenna is inserted during BCI testing
• #2547: CAPL Interface
• #2487: Testing over network is slow when test become larger
• #2448: Driver of HI6105 is generating error 1 (ERROR_INVALID_FUNCTION)
• #2435: Start of test Initialization event is not sent anymore to switchmatrix device drivers
• #2430: Graphs cannot be customized anymore
• #2429: During the initialization of a window a strange (white) graph is seen
• #2428: Error that the turntable cannot be found in a testsite, if the starting angle is different from 0
• #2426: Software crash when loading TSF file in version 5.1.24
• #2424: Saving an EUT file to a read-only directory crashes RadiMation
• #2423: Power leveling in a multiband immunity test is not working
• #2418: Report generator code for advanced immunity data table
• #2417: Excel report generator should be able to use test specific templates
• #2410: EUT Angle offset is not transferred when starting a test
• #2396: Check the driver by pushing a button on the configuration screen.
• #2391: Storing the Drivers version in the test file
• #2390: Closing the eut window too fast kill the application
• #2380: Last test is not inserted according to sorting
• #2371: Radiated immunity fixed power information window does not contain a reporting button
• #2214: Single Radimation controlling the device driver system
• #2174: External test results
• #2141: Provide a link to the D.A.R.E!! Knowledge Base for detected errors
• #2104: Report window is too small to work with.
• #1965: RadiMation does not start if an old process is still running in the background
• #1736: Device driver advanced screen receives wrong hWnd

RadiMation version 5.3

• #2689: Tektronix TDS is missing detection if the marker is set correctly.
• #2670: Driver: AR150A250
• #2667: Driver: RadiMate with dBV unit
• #2659: Driver: R & S SMB 100A
• #2655: creating a new test configuration without a test site is crashing the software in amplifier compression test
• #2652: Extended frequency range for Rolf Heine LISN LN-KFZ20
• #2632: Driver: Agilent Model N5181A-506 (250 kHz – 6 GHz)
• #2624: Drivers: Injection devices and current probes and preamps
• #2623: Drivers: LISN drivers
• #2621: Drivers: Amplifier drivers
• #2620: Drivers: Antenna drivers
• #2618: FSEB 30 is not detected correctly
• #2617: driver: AR 5000A250
• #2608: driver: Frankonia FC 02 Positioning Controller
• #2592: HI4422 device driver is crashing when the advanced configuration window is closed
• #2546: Display protocol driver
• #2504: driver: R&S SMA100A signal generator
• #2493: Create external PM option for HP 8642B and HP 8673B
• #2477: anritsu analyser is giving invalid information when zooming in
• #2471: RadiCentre Multi Switcher - Not all bytes are written to the GPIB Board
• #2470: network analyser review window is not loaded in build version 5.3.909, keeping internal windows open
• #2464: Sequence file test does not allow removing of a test.
• #2463: Saving eut file can react as save as with same file name
• #2459: Description window does not match the name of the device
• #2458: inn co turn table stops turning during the test
• #2442: Device driver for agilent 83630A/83640A
• #2437: Driver: Kalmus Model 757C (via IF-488 interface)
• #2427: Driver: Bonn Elektronik BLWA 2010-50 & BSA 0122-100
• #2420: FSEB driver is giving error during start up option not available
• #2403: Empty Window message when starting RadiMation whed drives are gone.
• #2401: HP3478A used as a DC voltmeter gives 30% of actual value when using the recommended value from the manual
• #2394: Build scripts generate warnings when building the shared libs
• #2393: Manufacture information is cleared when pressing the X in the top right
• #2392: Add auto power on option in driver for FM7004
• #2389: fsh 6 driver generates overflow
• #2387: Driver: Tektronix TDS748C
• #2386: Driver: keithley 2700
• #2385: Driver: Lisn Schwarzbeck NSLK8126
• #2384: Pre amplifier driver Miteq AFSX 4...
• #2383: RadiSense driver does not support filter settings
• #2378: RadiMation Script fails because there are still 3 windows open message , but no window are displayed
• #2375: Font bottom of the graph is not the same as on the left
• #2324: GPIB driver of Schaffner CPW9670 does not work correctly while the rs232 does work correctly
• #2267: Driver: NRP-Z91 with USB Adapter NRP-Z4
• #2247: ESI driver is having problems when the observing time is equal to detector time
• #2188: Crash with esi on PML with RE multiband
• #2081: Messagebox without text pops up
• #2013: Customer database drivers cannot load a MS Access 2000 (and newer) database
• #2012: In MS Access customer database driver it is not clear if the database is correctly loaded
• #1779: Limit line configuration does not allow adding item at the top
• #1070: No external FM modulation possible
• #1066: No external pulse modulation capability