Latest revision as of 15:07, 28 March 2025

The ISO11452-4 standard describes the testing and measurement techniques for Bulk current injection (BCI).

Test method[edit]

The standard describes the following test method:

This method is supported by RadiMation.

@@ Line 1: / Line 1: @@
-The '''ISO11452-4''' standard describes the Testing and measurement techniques for Bulk current injection (BCI).
+The '''ISO11452-4''' standard describes the testing and measurement techniques for Bulk current injection (BCI).
+=Test method=
+The standard describes the following test method:
+* Conducted immunity BCI 100 kHz to 400 MHz - see Application Note 160: "[[RadiMation Application Note 160|How to perform an ISO 11452-4 BCI (Bulk Current Injection) substitution test]]"
-'''Test method in short:'''
+= Supported by {{RadiMation}}?=
-Increase the forward power applied to the current injection probe and measure the injected current (Iref) until
-either
-*The measured current reaches the specified test level, or
-*The forward power reaches the power limit PCW limit.
-= Supported by {{radimation}}?=
 This method is supported by RadiMation.
 [[Category:Standard]]