Configurable XYZ Positioner
Jump to navigation
Jump to search
The Configurable XYZ Positioner device driver is a Positioner which is supported by RadiMation®.
Configurable XYZ Positioner[edit]
This driver can be configured to send commands to an EUT X, Y and Z-axis Positioner. It will be used in a Radiated Emission test with the location type GTEM configured. Below an overview of the commands to configure:
Initialisation and Check[edit]
 Reset
|
The reset command sent during the initialisation phase |
| Init
|
The command sent during the initialisation phase |
| Get ID
|
The command send to request the identifier of the device, e.g. *IDN? |
| Returned ID
|
The response of GET ID, this can either be the returned value or an regular expression |
| Deinit
|
The command sent during the de-initialisation phase |
| Wait for Completion after sending command
|
XYZ Positioner[edit]
| X Position
|
... |
| X Position Stop
|
... |
| Y Position
|
... |
| Y Position Stop
|
... |
| Z Position
|
... |
| Z Position Stop
|
... |
| Waiting time
|
... |