Release Notes/Solved items Version 2015.3
Jump to navigation
Jump to search
RadiMation version 2015.3.3[edit]
- #2550: Menu option that starts NI I/O Trace
- #5091: Debugging of device drivers through DDLOGGER.DAT should be simplified
- #5693: Driver: Agilent E7402A Spectrum Analyser
- #6008: Possibility to temporarily disable system error checking in a device driver
- #6119: Error that the frequency of an already used testsite is not suitable
- #6384: How to use the R&S ESCI 7's built-in pre-amplifier in 30MHz-1Ghz range
- #6400: Driver: IFI ST181-10 Amplifier
- #6435: Is it possible to change a correction of an already performed MB emission test?
- #6445: Keywords ||DATE MEASUREMENT|| and ||SETUP TYPE|| do not work anymore
- #6447: Slow powermeter measurement of the R&S NRP Z91
- #6533: PDF version of the RadiMation manual is 55 MB
- #6551: Enables users to easily send Error Reports with RadiLog
- #6553: Add RadiLog messages to the R&S NRPZ powermeter device driver
- #6567: Include a menu entry in the main menu to start the RadiLog
- #6597: R&S NRP-Z91 cannot be used in Powermeter Virtual Instrument
- #6598: Checking a R&S NRP-Z91 takes forever when it is not connected
- #6608: Add RadiLog messages to the USB HID device stream
- #6653: Sending an error report causes an error report
- #6655: Output parameters are not shown in RadiLog
- #6658: Updating Error Report Window
- #6659: Added button to ReportStauts error in RadiMation
- #6666: Driver Teseq PMU 6006 powermeter
- #6721: Not possible to measure the average field probe value during Multiband
- #6722: RadiLog crashes with a 'startIndex cannot be larger than length of string'
- #6778: More lines are included in the graph in a report than requested
- #6784: “hot-key” to export the numbers from the harmonics + linear graph EUT-Calibration module
- #6823: Do I need correction files in RadiMation for powermeters?
RadiMation version 2015.3.2[edit]
- #1106: Directory names in the configuration should be shortened if they don't fit in the listview control
- #2731: Address information of the customer, manufacturer and test-site should be able to be copied from or pasted to the clipboard
- #2860: The amplifier control window is displaying nothing if no items are inserted
- #4538: Turn during measurement explanation
- #4805: Data export from menu REPORTS-EXPORT is not working
- #5692: Driver: 3115 Double-Ridged Guide Antenna
- #5877: Proceed to include some proposed wiki pages for inclusing in manual
- #6071: Very slow band switching in Multiband Immunity (Levelling problem of Power Delivery Test)
- #6277: The 'cancel' button should not be shown when an engineers is removed
- #6283: Broadband units (like dBuV/m/MHz) are not possible for traces
- #6438: Default frequency range of the EMCO / ETS-Lindgren antenna 3117
- #6512: Use the Microsoft Visual Studio 2015 compiler
- #6521: Amplifier Linearity test requires an antenna in the selected testsite for Conducted Immunity
- #6546: New device drivers is raising Description for this error is not available error 536879923 during startup
- #6548: Minimum supported Windows version should be changed to Windows 7 SP1
- #6585: NRP Z55 zero operation took longer than 60 seconds error
- #6588: RegisterDeviceDriver too slow. It takes a second.
- #6605: Is the Ines USB-GPIB-2 card supported?
- #6606: Is the Prologix GPIB convertor supported?
- #6610: R&S ESRP 7: Not all bytes are written to the GPIB-Board
- #6645: How can I set the resolution to logarithmic stepsize?
RadiMation version 2015.3.1[edit]
- #3324: Linearity check for calibration (16 points, 5.1 dB down)
- #4690: Language error: initialisation successfull <=> successful
- #4772: Add a 'Pause' as a possible action
- #5004: A warning should be shown if the AD-Channel maximum and minimum are the same
- #5250: Change format of graph export per default
- #5513: Directories configuration of latest version is interfering with older RadiMation version
- #6168: Harmonic Graphlines have unlogical names
- #6190: Add a general notification icon on all the Multiband configuration windows
- #6193: Change the 'Change' button to 'edit' including a picture button.
- #6196: The Version number in the shared Libs DLL's are not updated
- #6197: Add a 'Remove' option in the right click menu of a device in the TestSite configuration window
- #6201: The table with measurement data is not shown when the Harmonic test data is opened
- #6242: Adding a 3rd amplifier to the amplifier control panel does not update the amplifier control panel correctly
- #6292: Rename tabs on the testsite configuration: 'Standard 1' to 'Devices 1' and 'Standard 2' to 'Devices 2'
- #6300: Enhanced Status Window parameters are not shown
- #6326: Add more low baudrates: 1200, 600, 300, 50 Baud
- #6335: 'Advanced Information' window should be renamed to 'General Information'
- #6357: Regex returns 0 for notations with a space between +/- sign and the actuall number
- #6401: Configurable Amplifier should have wait options after sending power on (for warming-up) and off (for cooling down)
- #6408: Amplifier Slope verification for Conducted Immunity
- #6455: Warnings related to wxEXPAND are shown when a wxWidgets dialog is shown
RadiMation version 2015.3.0[edit]
- #5999: Mark the 'Continuous Measure' button in a different color when it is activated
- #6295: When note window is opened the focus or cursor is not set to the text field by default
- #6368: Duplicating more than 100 tests in a sequence takes a long time
- #6369: Duplicating a test in a sequence file, doesn't mark the sequence file as changed
- #6370: Radio buttons of Conducted Emission Manual Mode traces are swapped
- #6387: It is not possible to select multiple peaks and therefore needs to select peaks one by one
- #6388: Adding new peaks is resetting the peak lists selected column information