Release Notes/Solved items Version 2020.2
Jump to navigation
Jump to search
RadiMation version 2020.2.7[edit]
- #8377: Conducted Immunity CS not able to execute in MB test error Illegal Conducted Immunity Calibration File
- #10434: HP 34401A always uses the DC V setting Instead of AC V and therefore we are not able to calibrate
- #10436: HP 34401A MultiMeter - By default select AC Coupling
- #10819: Change default name of installation directory
- #10920: In Word export File QP Markers are connected with a line
- #10960: You are not allowed to edit this selection because it is protected.
- #11133: HP 34401A cannot be used in AC mode
- #11205: ErrorReport: "No voltage level indication available in CI-MB
- #11212: Graph customization configuration shows dB(m) as unit instead of dB
- #11284: "No current level indication available in CI-MB
- #11286: Change email adres in language files.
- #11326: CI - CS101 - SB - Power is not limited to value stored in Calibration file
- #11330: Report generator data inserted in wrong columns
- #11338: RadiMation does not reset previous shown sub-windows when restarted on dual monitor systems
- #11344: Unclear message: 'Connect powermeter to reference' during amplifier compression system calibration
- #11346: ErrorReport: "Collection was modified; enumeration operation may not execute."
- #11360: ErrorReport: "Signal power went too high (-6 dBm) during power delivery test"
- #11377: ErrorReport: "Object reference not set to an instance of an object."
- #11385: Better error description for The factory for the persistable object is not registered
- #11389: ErrorReport: "Object reference not set to an instance of an object.", when calculating the UFA
- #11390: Error code from RadiSense IV is reported as another error
- #11410: Adjust form "Test Engineer" to use the notification control.
- #11415: Using edit button EUT Information is not doing anything
- #11417: ErrorReport: "Input string was not in a correct format."
- #11431: Anchoring and resizing of frmSequence.cs
- #11437: "incorrect pass/fail statement on EUT overview page"
- #11439: Cannot update drivers for Raditeq RadiMation
- #11440: Cannot change language in 2020.2.6.
- #11443: Rohde & Schwarz FSL 6: Specific System Error: -148,"Character data not allowed; INP:COUP AC".
- #11444: Driver: RS1860B stick probe.
- #11449: ErrorReport: "Keyboard functions not working when browsing for EUT file"
- #11452: Report generator issues (graph not included + unit text missing in description)
- #11453: Report generator does not include column: Peak Value
- #11458: Settings the test state in EFT/Surge Manual does not correctly progress the test state
- #11460: Treeview selection control on graph export is not correctly sized.
- #11472: Include correct dialogs dll in setup.
- #11475: Units are not visible behind start frequency.
- #11481: Functionality to include the AD-channels as a table in generated reports
- #11485: Column ‘selected’ with text ‘true’, when no final peaks are measured.
- #11515: R&S FSU raises error when Preamplifier is used above 3.6 GHz
- #11520: How to add additional cal kits in RadiMation
- #11533: Test receiver ESL 6 (9kHz-6GHz): Specific System Error: -200,"Execution error; Function not available; BAND 120 KHZ".
- #11596: XAL: How to improve "overall" measurement time!
RadiMation version 2020.2.6[edit]
- #4170: Report generator ability export table cells without unit
- #10852: Error -2147024893 after initial installation
- #11000: Cannot find field probe 0 in the currently active testsite.
- #11168: Driver: Ametek CIP 9136A.
- #11171: Driver: BONN Elektronik BDC 1060-20/200.
- #11172: Driver: Schwarzbeck HA9251-48.
- #11180: Driver: BONN Elektronik BSA0140-250.
- #11181: Driver: BONN Elektronik BLWA2010-400.
- #11182: Driver: Ametek CBA 1G-1000.
- #11183: Driver: Ametek CBA 3G-450.
- #11231: ErrorReport: "Error Virtual device and then out of memory error after second run of LISN test: "
- #11247: Version number that is included in the ErrorReport e-mail has 4 parts instead of normally communicated 3 parts
- #11303: Report generator keywords for impedance are not described in the manual
- #11305: Opening >1 LLF from explorer having RadiMation closed will lock the file.
- #11311: Table of content starts at level 4
- #11324: Logarithmic value interpolation is not working
- #11400: Buttons in PI- EFT are not according to GUI guidlines.
- #11407: Configure button standards, icons are missing.
- #11408: Move save as button in Test equipment screen.
- #11409: Make it possible to show delete or remove in the ctlAddEditRemove control
- #11413: Duplicate button is not perfectly aligned, as it is placed slightly lower than the other buttons
- #11442: Driver: RS2018B probe.
RadiMation version 2020.2.5[edit]
- #10788: R&S ESU26: Receiver (ID1465) Input 1 (LAN): More points received from the receiver/analyzer then calculated.
- #11249: problem with generating logarithmic step from immunity testing in report
- #11289: RI MB TSF cause crash.
- #11381: Embedded font warning when opening pdf manual
RadiMation version 2020.2.4[edit]
- #10681: convert main menu to the DevExpress XtraRibbon
- #10682: Build dynamic devices menu in XtraRibbon
- #10683: Build dynamic testsite menu in DevExpress XtraRibbon
- #10861: Add a 'Configure' button on the Standard selection dialog.
RadiMation version 2020.2.3[edit]
- #10708: Put controls that are directly on a form in a panel
- #10722: Retrieve gray-scaled pictures to be included on buttons
- #10723: Change colored pictures to gray-scaled pictures
- #10975: Data of S-Parameter measurement is not shown anymore
- #11012: Icons for the correction file selection on the device driver configuration are huge
- #11029: Object reference error when a new heliview antenna diagram location is created
- #11030: Value cannot be null, when specifying the address of the Heliview location
- #11031: Smallest window size of Heliview Integrity test is not correct
- #11032: Starting the Heliview integrity test crashes RadiMation
- #11160: When 'measure during turn' is activated without a turntable in the testsite, the tests stops very fast without warning
RadiMation version 2020.2.2[edit]
- #10706: About window dynamic version number update.
- #10707: Replace all controls on all windows.
- #10709: Replace the icon on all the windows.
- #10712: Update windows and controls in the shared libraries.
- #10713: Replace all popup menus to use the DevExpress popup menu.
- #10848: InvalidArgument=Value of '0' is not valid for 'DropDownHeight'.
- #10853: Scrolling in screenshot image of error report is not possible anymore.
- #10856: Oldest line of the eventlog is selected.
- #10857: Customize button on the Graphs tab of the configuration dialog is partially hidden.
- #10862: Two different languages are marked as '(Current)'.
- #10864: Company logo of the reseller is not shown anymore.
- #10873: Object reference error.
- #10882: Activate DirectX support on the skinned version.
- #10893: The date picker is no longer available.
RadiMation version 2020.2.1[edit]
- #10684: Shorten the menu entries in the (main) menu
- #10706: About window dynamic version number update.
- #10711: update darelang to accept devexpress controls
- #10750: Ampersands are shown in the new ribbon menu
- #10835: Could not load file or assembly 'DevExpress.Dialogs.v19.2.Core
- #10881: One-tabpage tabcontrols to show as a border have a TabStop