Release Notes/Solved items Version 2021.1
Jump to navigation
Jump to search
RadiMation version 2021.1.9[edit]
- #11666: ErrorReport: No Tooltip found for buttons placed on the graph control
- #11693: AW: Report Generator - keyword Frequency Step and Modulation does not work
- #11743: ErrorReport: "rbw coupling error" on HP 7405 analyser.
- #11746: ErrorReport: "Can't auto couple sweep time in zero span" on HP 7405 analyser.
- #11779: wxWidgets Debug Alert
- #11782: Driver: Teseq CBA 1G-600D.
- #11789: Editing a limit line value initially shows the unit default value scaled to the new selected unit
- #11790: VI instrument time index axis is not updated for the additional time measured
- #11791: Using SQL to format a custom peak table including frequency data adds the _RAW frequency column data instead.
- #11792: RadiTower unnecessary moved to 4M after measuring at 1m
- #11793: Error Start frequency is too low for selected equipment, when viewing the data of two tests simultaneously
- #11794: RI Graph, no filter at top of the Graph
- #11798: Graphs settings, Frequency Range/Scaling not possible.
- #11813: Cannot connect to Frankonia FC03 antenna tower controller
- #11816: Using order by clauses on table names results in the table not being found when the unit is missing in the keyword
- #11817: 0,5 kV is not selectable in the EFT manual mode test
- #11819: ESW8 Measuring input 2 @1 GHz results in error -222 data out of range
- #11820: Using a <CUSTOM> field in the EUTInfo.ini results in the input being shifted when shown in RadiMation
- #11826: During test initialisation a "Pause" window before action is not shown to the user
- #11832: limit lines is using a wrong x axis scale.
- #11833: Error report improvements.
- #11838: Device driver for Rohde&Schwarz SMBV100B Signal Generator
- #11839: Device driver for Rohde&Schwarz FSV3000 Spectrum Analyzer
- #11840: Incorrect step frequency in immunity.
- #11841: Peak number not visible in graph.
- #11849: Reporting of antenna height incorrect during test and in review
- #11852: Manual clamp mover driver is reporting the distance in degrees instead of centimeters
- #11853: Manual clamp mover driver shows the distance in on 0.001 mm accuracy, which is just unlogical
- #11859: RI logarithmic "Frequency Step" not possible to set smaler than 1%"
- #11863: Tooltip of shown peaks uses incorrect text, higher\lower then should be higher\lower than
- #11866: NSG4070 Does not power on at start of test.
- #11871: TESEQ NSG 3040: Device returned Error code: 19.
- #11872: NSG4070 failure?
- #11884: Number of peaks not correctly applied
- #11888: Peak detection absorbing clamp test
- #11889: Radilog becomes unresponsive and freezes Radimation, when monitor inputs are measured during MB Pulsed testing.
- #11890: ESW8 1000 kHz not possible with QP.
- #11878: Out of memory exception while doing EUT Save As...
RadiMation version 2021.1.8[edit]
- #11504: Driver: Solar Electronics 2352-1.
- #11505: Driver: Teseq CBA-series amplifiers.
- #11660: Driver: Comtest Engineering MCP-01 switch matrix
- #11755: Driver: Bonn BLMA 2060-50 Band 1 to 5
- #11777: Driver: PMM Antennas.
- #11780: Driver: EMC Shop DC1G-1000A coupler.
- #11781: Driver: EMC Shop DC6G-250.
- #11788: Export limitline graph as table in test with Frequency unit as kHz raises Frequency too large exception
- #11796: Duty cycle is not visible in Burst measurement.
RadiMation version 2021.1.7[edit]
- #4525: Support the gated pulse modulation
- #11610: Driver: Boonton Power Meter 9241.
- #11714: Out of memory during printing
- #11716: Driver: Frankonia EFS-Laser
- #11753: Cable table column chooser is overwritten with the copy context menu
RadiMation version 2021.1.6[edit]
- #11664: Driver: R&S RTO2024 as a dual input powermeter/analyzer.
- #11673: Multiband immunity modulation configuration dialog is shown too small by default
- #11674: Warning regarding pulse time is still shown when PM is disabled
- #11675: Multiple messages in notification area of modulation configuration is are not readable.
- #11676: Up and down of the pulse gating repetition time are now working
- #11677: Modulation configuration error links to an unknown knowledgebase page
- #11692: Error cannot find signal generator in currently active test-site when changing the frequency of the powermeter
- #11706: ErrorReport: "Object name is shown instead of limit line value when trying to configure a limit line
- #11711: Index out of array
- #11713: Changed EUT details not stored when closing EUT file.
RadiMation version 2021.1.5[edit]
- #11684: Cannot enable modulation
RadiMation version 2021.1.4[edit]
- #11651: EUT Monitoring graphs are not shown in the frequency graph, but are available in the time graph
RadiMation version 2021.1.3[edit]
- #11617: No measurement results when using a frequency list.
RadiMation version 2021.1.2[edit]
- #11593: Out of memory exception raised while using CLI.
- #11598: Harmonics calibration based on field measurement is not able to use spectrum analyzer
RadiMation version 2021.1.1[edit]
- #42: Add EUT Monitoring Input support for the EFT, ESD and Surge tests
- #4161: Multiband power measurement seems to limit at -100 dBm
- #5807: The minimum value of the dBuV/m should be around -67 dBuV/m
- #5836: Lower the minimum values for magnetic fields to far below -100dBuA
- #10454: When reading out the data of the powermeter with a switch matrix it seems that it is uncorrected
- #10457: Importing EUT Data
- #11093: Average trace is not visible when below -100
- #11165: Project: Simplify copying of customer provided data into an EUT file.
- #11189: Send corrected forward power value to switch matrix
- #11214: min/max values and division marks are not shown during display of graphs
- #11340: Could not find default endpoint element that references contract 'RadiLogService.IRadiLogService' in the ServiceModel client configuration section.
- #11343: Unclear message: 'Please connect the powermeter to the power reference.' during amplifier compression system calibration test
- #11433: Item #154 -Loading the device driver list (amplifiers) is taking longer than expected
- #11435: Amplifier control window position is not remembered on restart
- #11436: Amplifier control window issues
- #11464: RadiMation installer must not install the example directory in the program files(86x) folder
- #11465: Changing the installation directory of RadiMation does not work.
- #11493: When using a R&S NRVD the frequency correction is not set to ON.
- #11528: Status of actual status of a multiband immunity test is not clear in the skinned version
- #11568: No graph for low frequent magnetic field emission measurement