Release Notes/Solved items Version 2022.2
Jump to navigation
Jump to search
RadiMation version 2022.2.4[edit]
- #6725: Default configuration of the RPR powermeters
- #6783: RadiField Polarization driver should have 'ignore height change' checkbox disabled
- #7358: Strange dBm formatting is included in RadiGen error message
- #10178: Application note 121: Using a RPR powermeter stand-alone with RadiMation® free version
- #10263: Questions doing IEC 61000-4-3 with a RadiCentre CTR1009B that has 4 RSW1921N modules
- #10287: FieldProbe RSS1004A: Not able to set filter
- #12876: Device driver: Bonn amplifer - bonn 0830-250/100/60D - 3 bands
- #13087: Changing the individual directory configurations does not result in remembering the new directory.
- #13106: USB Dongle not detected
- #13119: ESD: Test passed icon is set to fail while the test has been passed
- #13121: The duplicate button on the sequence overview cannot be used when selecting multiple TSF files.
- #13134: Report generator, expected harmonics and compression data is not exported after upgrading to a newer version.
- #13137: The note button of a graph in the RI Fixed power result window is not working.
- #13139: Directory is not stored after changing it in the configuration.
- #13156: mk-messtechnik motion detection doesn't detect all alarms correctly
- #13173: Turning modulation off for a RadiGen only turns gated pulse modulation off, but leaves pulse modulation on
- #13184: Monitoring input channel Setup error.
- #13194: Which receiver settings are used when measureing the voltage in CI MB using spectrum analyzer
- #13197: Latest firmware version of RadiSense plugin in RadiCentre is not correctly detected
- #13199: AR250W1000B Interlock not detected
- #13208: SURGE: Deleting a sequence from the sequence list results in the order of the sequences being changed.
- #13219: ESW44 initialization error
- #13220: No measurement during antenna movement when an INNCO CO3000 antenna tower is used
- #13225: No polarization control on Frankonia FC05 possible
- #13227: -200 execution error when selecting a new LISN line after the analyzer has been reset due to loading a new test site with another "instance" of the analyzer driver
- #13237: Fluke 8845A performs measurements in auto ranging mode
- #13245: Include predefined sizes of several horn antennas
- #13246: Driver: ETS-Lindgren probe polariser
- #13247: Add reseller: Nanjing Rongxiang Testing Equipment Ltd.
- #13263: Configuration Directory cannot be changed
- #13265: Configuration Directory of RadiMation cannot be changed
- #13268: Signal Generator error
RadiMation version 2022.2.3[edit]
- #12600: Frankonia FC06.1 Antenna mast 1 polarization change still has problem in changing polarization
- #12928: Test equipment Monitoring tab Add/Edit/Delete buttons are not correctly placed
- #12933: Pressing cancel on the advanced option password prompt results in an invalid password error
- #13004: Check version number of LAN controlled RadiCentre
- #13011: Driver: COM-POWER ARI-6000-100
- #13012: Driver: COM-POWER ARI-1000-200
- #13013: Driver: COM-POWER ACS-250-100W
- #13014: Driver: SIGLENT SSG3021X
- #13015: Driver: Anritsu 68369A
- #13016: Driver: COM-POWER LI-3P-232
- #13017: Driver: COM-POWER AC-220
- #13018: Driver: COM-POWER AB-900A
- #13019: Driver: COM-POWER AL-100A
- #13020: Driver: COM-POWER CLA-150A
- #13021: Driver: COM-POWER PAM-103
- #13022: Driver: COM-POWER PAM-103
- #13035: Resolve compile errors of device drivers when using C++17 compiler settings
- #13036: VisaBase::GetUsedVISACommunication returns another response than expected when VXI-11 is used
- #13059: The control of the Frankonia FC06.1 controller is not working
- #13085: Configuration dialog of R&S NRT powermeter driver raises a wxWidgets Debug Alert
- #13104: How to export standards data in the report generator.
- #13107: Controlling the Schwarzbeck TK9420 LISN raises an 'Unknown SetValueID'
- #13222: EUT file doesn't show the list of performed tests
- #13224: New Driver for Bonn BLWA 0830-250/100/30D doesn't work
- #13244: Auto detect does not find Keysight MXE N9038B
- #13254: Test data is not exported when using a WHERE clause in SQL report generator keywords
RadiMation version 2022.2.2[edit]
- #4601: Report, view and compare improvements for CAL files
- #5742: Determination of % out of 6dB error after UFA calculation
- #5936: Possibility to generate a report of a calibration with Report Generator
- #8586: Milmega 80RF1000-175 amplifier is not switching.
- #9626: Driver: ETS-Lindgren 2090
- #12686: Wrong test level if order is tick checkbox/change testlevel.
- #12765: Extend Uniform Field Area (UFA) calculation to include statistical information
- #12767: Calculate statistical information of UFA calculation.
- #12769: Show the result of statistical information of the UFA calculation on the UFA result window.
- #12770: Include report generator codes to include Statistical information in the report
- #12771: Update standard printout of UFA calculation to includes the calculated statistical information:
- #12861: Milmega 80RF1000 does not switch.
- #12957: The Note and Units buttons are not shown on the UFA result window.
- #12988: The maximum tolerance of the UFA calculation is not shown if it is all below the accepted tolerance
- #12989: Wrong unit is shown at maximum deviation frequency on printout of uniform field area calculation.
- #12996: Reading a binary block buffer results in a time out when using VISA Socket communication
- #12999: N9322C Fails
- #13000: N9322C Fails
- #13002: Remove code related to HP3478A from Fluke 8840 driver
- #13003: Show the number of device drivers on the RadiWiki website
- #13092: Can the QP detector value be shown in the peak table if the QP detector has been used in the measurement?
- #13094: Columns hidden from the detected peak table are still shown in the report
RadiMation version 2022.2.1[edit]
- #512: Ability of auto detection of all connected equipment
- #4517: Auto detect connected Radi-xxx equipment
- #5750: Improve the printout template of UFA calculation
- #6170: Add support for IEC 61000-4-16: conducted immunity: common mode disturbances in the frequency range 0 Hz to 150 kHz
- #6769: Improve detection of Radi-products
- #12766: Add report button to the calibration result window
- #12768: Add configuration options for the statistical information to the UFA calculation configuration dialog
- #12816: Attenuation gain system calibration does not report the calibration level when opening the .CAL file
- #12920: Switch to new text generation engine.
- #12948: The dropdown list with pre-filled tolerances is unlogical
- #12949: The red maximum error line in the UFA graph should be using the value as specified for the accepted tolerance
- #12950: Accepted extended tolerance should not be smaller than accepted tolerance
- #12951: Also include an 'Extended maximum error' graph to the UFA calculation graph
- #12952: Selected template and report filename are not remembered after report is generated for UFA
- #12954: A default filename and location for the report of a calibration file is not provided if the TSF file of the UFA calculation was not saved
- #12955: Unclear what the numbers on the UFA calculation result are indicating
- #12956: The maximum deviation of the UFA calculation is shown with too many digits
- #12958: Optimized UFA calculation drops unexpected points