Release Notes/Solved items Version 5.7

RadiMation version 5.7.2[edit]

#2204: Add a peak by clicking on the emission graph
#2920: disable zoom in does not work directly
#3073: Trace gaps on emission plots
#3497: Keithley 2000 scanner does not detect connected device correctly
#3502: RadiMation stays in a never ending loop to zoom the peak
#3565: Negative turntable angles should be allowed in combination with the "measure during turn" option
#3584: Wrong value readout of LeCroy 9361 scope
#3628: Overloaded driver of the ESU is crashing then the device *IDN? description is not in capitals
#3629: Changing the test order before reporting is crashing the RadiMation
#3630: Driver: Maturo NCD
#3634: Scaling in CE multiband is going to -1000 during the test.
#3639: Driver: AH system SAS-570
#3640: Driver: AH system SAS-571
#3642: Driver: AH system SAS-550-1B
#3643: Driver: AH system SAS-560
#3649: Driver: HP 8673E
#3650: Driver: HP 8662A
#3654: Driver: IFI SMCC10
#3655: Driver: OPHIR 5163
#3657: Driver: HP 8341B
#3658: Driver: Solar 6338-5-PJ-50N
#3659: Driver: Solar 9233-50TS-50N
#3661: Driver: Solar 7334-1
#3662: Driver: Electro metrics EM-6892
#3663: Driver: Electro metrics EM-6960
#3664: Driver: Electro metrics EM-6961
#3665: Driver: Electro metrics EM-6876
#3668: Driver: Solar 9251-1
#3673: Peak selection is not working as expected after deselecting all the peaks
#3675: Configuration for optimize angle and height has problems with the measure- and observation time of different detectors
#3676: During Optimize Height actual defined settings are not used but settings defined a step before
#3677: When you press <<Detect Peaks>> after a radiated emission test in multiband you can not select more than one peak afterwards.
#3678: Peak detected in first band but not in second band
#3680: Configurable device signal generator device driver is not taking the correct codes in version 5.6.9
#3682: Emission multiband is slow when 200 peak sweeps are used
#3692: Prana amplifier does not turn off when the amplifier is changed during manual mode

RadiMation version 5.7.1[edit]

#1948: No gridlines are shown from 1 GHz to 2 Ghz in logarithmic mode
#2599: Order of tested bands should have a preference for the frequency order
#2681: Editing a testlevel when multiple bands are selected, only changed the variable test-level for the first selected band
#2754: Dongle is not detected when using Remote Desktop.
#2756: Frequency Label of the x-axis of the graph in a correction file is displayed too low
#2775: Measurement of current by using the current sensor in combination with a multimeter or oscilloscope is wrong
#2866: How can scaling of frequency axis be configured when logarithmic scaling is choosen?
#2911: dBmA/m unit in multi band is giving wrong measurement information
#2999: Order of the bands in Multiband immunity is random
#3141: Test equipment wrong in Sequence mode
#3416: AM modulation indication on the HP 83630 is not activated
#3454: Term MHz in Graph while the values are also in MHz.
#3617: Driver: Anapico APSIN300HC
#3621: No virtual multi meter available in version 5.7.0
#3622: January and February dates are not detected on a non-english PC
#3623: RI Magnetic calibration are not displayed after RadiMation is restarted
#3625: New bands in a multiband test always have the color black
#3626: Driver: R & S FSV 3
#3627: Driver: R & S FSU 3
#3632: Carrier level jumps directly from -100 dBm to +1 dBm when it should go up 1 dBm

RadiMation version 5.7.0[edit]

#1937: Esi startup problem(s)
#1986: Switching to the next band takes more then 2 minutes
#2479: Driver: 1000W1000C
#2557: FSP30 as power meter driver
#3164: Cable correction between the signal generator and the amplifier is performed in the wrong direction
#3494: ESU Time Domain Scan Fails when using lan
#3551: R&S ESxx receivers: Perform short calibration before the final measurements
#3560: R&S ESxx receivers: Enable demodulator
#3568: SMR 20 does not support the external PM modulation
#3569: strange behaviour after driver package update ESVS10
#3575: Driver: Emco 3104C antenna
#3576: Problems with deinitialization of ESVS10
#3585: For a configurable LISN no manual mode is included
#3586: CE multiband LISN test does not perform the band measurement
#3587: driver for R&S SMC-B103
#3588: The note on the multiband test window cannot be changed
#3589: Note textbox on multiband tests, is not showing scrollbars
#3590: Final peak measurement is performed too often
#3591: Report generator is using more than 500 MB of memory
#3617: Driver: Anapico APSIN300HC
#3618: Driver: 30S1G4
#3619: Driver: ETS EMCO 3142D
#3620: Driver: Narda 6630

Release Notes/Solved items Version 5.7

RadiMation version 5.7.2[edit]

RadiMation version 5.7.1[edit]

RadiMation version 5.7.0[edit]

Navigation menu

Search