Release Notes/Solved items Version 2022.1
Jump to navigation
Jump to search
RadiMation version 2022.1.4[edit]
- #12066: Driver: Keysight Fieldfox N9916B
- #12691: Antenna scan add Attenuation in table
- #12732: Correlated graph is not shown in Multiband GTEM measurement
- #12796: Scan resolution for Rigol RSA5065
- #12803: Error during uniform field calculation
- #12809: Initialisation of the devices (especially the Rigol RSA5065) takes a long time (approx. 13s).
- #12835: Use advanced option "Reduce.Buckets.Minimum" to create a fixed suggested index trace to increase the resolution of the shown graph data
- #12839: Keysight E5061B SA (Port 2) + HP1141 100x: Device Driver Function Not Implemented.
- #12853: NSG3040A Surge generator connection problem
- #12855: Device driver not implemented?
- #12889: Driver: Bonn BLWA 0860-160/100/50D.
- #12900: Scaling of CE Multiband is not using the full screen.
- #12903: Fluke 8840, is being measured too fast, which result in a worse accuracy
- #12904: GTEM correlation differences
- #12905: Correction file raises warning that the frequency is too high.
- #12907: CISPR CAV detector does not turn on
- #12908: Probe Connetion.
- #12916: Switching ports from 1/2 to T/R is setting the end frequency in override mode
- #12919: 'Continuous Measure' button remains to show 'Stopping continuous measure'
RadiMation version 2022.1.3[edit]
- #9088: USB communication with RadiCentre is disturbed by Lumiloop TCP Server
- #11501: Driver: R&S RTE1024 as powermeter
- #12020: Signal Generator Rohde&Schwarz SMCV100B
- #12131: Update Raditeq dongle in chapter 2 of the manual
- #12403: TSF RI limit line control, title of form is not shown, there is no OK button
- #12538: BAND selection for driver of IFI T82-250.
- #12557: Issues when starting tests using the EM-Test NX7
- #12669: Multiband of Absorbing clamp can not move to 6m.
- #12685: Primary GPIB address of 31 can be selected, while the maximum allowed primary GPIB address is 30
- #12688: Driver: Yokogawa DL750
- #12689: frmConfigTestLevelElectricalField uses wrong language resource id for the side button
- #12698: LISN Network implementation
- #12702: Stopping sequence
- #12705: Configurable Antenna Tower - Commands for height missing
- #12706: CISPR AV esw 8 time domain mode.
- #12707: Report Generator does not run correct for EFT tests
- #12714: Maturo FCU 3.0. Device driver not implemented
- #12718: MIL-STD Peak discrimination is always NB when a RBW above 100 kHz is used
- #12723: Start and stop frequency has changed during (de-)activation of the preamplifier
- #12725: Test not closed.
- #12729: Tektronix AFG3251C: Modulation frequency is not correctly set
- #12733: Data out of range
- #12734: Conducted Emission, data out of range
- #12744: Driver: Lumiloop 2.0+
- #12748: Frankonia AXL-200 raises error that device driver is unknown
- #12750: Schloder CDG6000 powermeter device driver shows wxWidgets debug window
- #12756: Initialisation of RadiSwitch takes a very long time when a Lumiloop is also connected
- #12757: Initialisation of RadiPos takes a very long time when a Lumiloop is also connected
- #12764: Extend the lumiloop LSProbe 2.0 driver to allow calibration of all 6 individual axis
- #12802: Ending a test without saving
RadiMation version 2022.1.2[edit]
- #5196: Allow to measure multiple detectors simultaneously during continuous measure
- #7849: Ability to save invalid TSF files and LLF files
- #11321: TSF file of Burst/Surge test cannot be saved when no cable is selected yet
- #11631: TSF cannot be saved if no protection key is present
- #11861: ErrorReport: "*.TSF file change without dongle not possible!"
- #11891: report generator text editor should not include RAW OADateTime values when generating reports
- #12151: Possibility to save an incomplete configured TSF file to disk
- #12158: RadiMation force closes when the process cannot acces the RadiLog file, because it is in use by another process.
- #12231: Driver: AFJ FFT3110.
- #12263: VI instrument window graph control are moved of the visible area when resizing the form
- #12321: Application note for close proximity magnetic field testing
- #12359: Save *.TSF file without dongle not possible!
- #12399: Error @ Restart last TSF
- #12402: Limit lines are not shown when applying filter settings
- #12404: Clean up invoke related code implemented on the RadiMation mainWindow
- #12406: Add notification bar too the MB field probe test level, stating that multiple probes will be averaged
- #12412: Device driver related UI components are not functioning as intented
- #12446: SpinUpDownControl shows white text on white background.
- #12464: Extend AD-Convertor driver for Tektronix TDS2000 series to allow USB connection.
- #12536: Dark skin white border at Note and Address information.
- #12539: issue 2022-03-30 AL1: frequency graph switch from log to lin after switching to Angle view.
- #12544: Sequence overview menu item stays active when cancelled.
- #12545: Connection problem
- #12553: TDEMI: Support multiple final detectors in parallel
- #12554: Ethernet Driver required for Agilent 33220A.
- #12576: Error final peak measurement R&S ESPI3 with RadiMation 2021.3.5
- #12588: When resizing the Pulse modulation configuration, the "Apply out of dwell time" is moved under the pulse gating frame
- #12601: Export of limitlines is showing a stepped instead of constant slope.
- #12603: No export was possible of measurement T21 due to out of memory.
- #12167: Validate LLF files at the start of test
- #12622: Start and stop frequency on UFA calculation printout are always zero
- #12623: Opening a unfinished PI data document will start a test without warning
- #12627: The maximum frequency is 10 GHz in the 'Free' and 'Essential' license types
- #12628: Control of an EUT controller is not allowed in the 'Essential' license type
- #12629: Control of a positioner is not allowed in the 'Essential' license type
- #12630: Change references to RadiMation Lite license to RadiMation Essential
- #12636: The about window shows that the RadiMation 'Pro' license is used
- #12637: Timeout while data transfer.
- #12641: CI calibration error.
- #12656: Logarithmic step frequency, starting from shows: -10000000000000 MHz
- #12661: Driver: RadiSwitch RSW1022V and RSW1024V.
- #12662: AM square wave modulation on Keysight N5171B generator.
- #12672: unable to split cells during template generation.
- #12700: Trial period of RadiMation Pro-error with start of test
- #12747: RS10 probe connect niet
- #12578: Antennerotator rotates to -3.8 degrees instead of 356.2 degrees
- #12762: How to change the Default Setting of Receiver Setting in the Software
- #12817: GPIB error: Hibernated NI drivers error. Restart your PC
- #4668: Allow to measure multiple detectors simultaneously during final measurement
RadiMation version 2022.1.1[edit]
- #9256: Update the SX32W to the latest version released by Safenet.
- #12125: The border of the non-maximized MDI child window is very narrow. Please enlarge it.
- #12126: Show the title bar of a passive MDI child window in a different colour than the active MDI child window
- #12127: Allow that end-user can select another skin.
- #12245: If only a single fieldprobe is measured, it will be used as the average field, even if it is not selected to be included in the average calculation
- #12278: RadiLog shows key-value pairs on the General tab instead of on the Input or Output tab
- #12282: Automatically focus the sequence overview window when the last test of the sequence is finished
- #12283: Option to select if the sequence window should remain open or close automatically.
- #12337: Copy the RadiPower USB drivers from DRIVERS.EXE to a sub-directory to allow manual driver installation.
- #12362: incorrect status info sequence.
- #12392: Skin is not applied correctly when switchen from the windows default to another skin.
- #12417: error while applying new skin.
- #12441: The corners of the buttons on the VI windows have white pixels in a dark skin.
- #12442: Unexpected borders are shown around buttons on some skins.
- #12444: Forms having a fixed light colour even using darker skins
- #12529: Driver: SCHAFFNER EMI Receiver SCR 3502 (RS232).
- #12534: AW: Export from Version 2021.3.5 => Out of Memory.
- #12628: Control of an EUT controller is not allowed in the 'Essential' license type
- #12629: Control of a positioner is not allowed in the 'Essential' license type
- #12631: The main window title bar includes 'RadiMation Essential' when the Essential license is used
- #12643: Voltage dips test
- #12663: Rohde & Schwarz BBA150 connection error