Difference between revisions of "Configurable Switch Matrix"

From RadiWiki
Jump to: navigation, search
Line 9: Line 9:
  
 
{{ScreenElementDescription|Device Driver|
 
{{ScreenElementDescription|Device Driver|
−
{{ScreenElementDescription|Reset|Text field to specify the reset command. The command is send to device during the test initialization.}}
+
{{ScreenElementDescription|Reset|Text field to specify the reset command. The command is send to the device during the test initialization.}}
−
{{ScreenElementDescription|Init|Text field to specify the initialize command. The command is send to device during the test initialization.}}
+
{{ScreenElementDescription|Init|Text field to specify the initialize command. The command is send to the device during the test initialization.}}
−
{{ScreenElementDescription|Get ID|Text field to specify the *IDN? query. The command is send to device during the device check.}}
+
{{ScreenElementDescription|Get ID|Text field to specify the *IDN? query. The command is send to the device during the device check.}}
 
{{ScreenElementDescription|Returned ID|Text field to specify the expected respond to have the Get ID compared with. The string is used during the device check in case a query is specified.}}
 
{{ScreenElementDescription|Returned ID|Text field to specify the expected respond to have the Get ID compared with. The string is used during the device check in case a query is specified.}}
−
{{ScreenElementDescription|Deinit|Text field to specify the deinitialize command. The command is send to device during the test deinitialization.}}
+
{{ScreenElementDescription|Deinit|Text field to specify the deinitialize command. The command is send to the device during the test deinitialization.}}
 
}}
 
}}
  
 
{{ScreenElementDescription|Operation|
 
{{ScreenElementDescription|Operation|
−
{{ScreenElementDescription|During Test|The commands send to device just before starting the test.}}
+
{{ScreenElementDescription|During Test|The command is send to the device just before starting the test.}}
−
{{ScreenElementDescription|After Test|The commands send to device after finishing the test.}}
+
{{ScreenElementDescription|After Test|The command is send to the device after finishing the test.}}
 
{{ScreenElementDescription|After sending perform a read and discard result|When selected the driver will perform a read after sending the command. Some device need to be read out before  
 
{{ScreenElementDescription|After sending perform a read and discard result|When selected the driver will perform a read after sending the command. Some device need to be read out before  
 
sending the next command.}}
 
sending the next command.}}
Line 27: Line 27:
 
}}
 
}}
  
−
[[Image:Configurable_switch_matrix_configuration_window_custom2.png]]
+
[[Image:Configurable_switch_matrix_configuration_window_custom4.png]]
 +
 
 +
{{ScreenElementDescription|Antenna Tower|
 +
{{ScreenElementDescription|Antenna Tower started|Text field to specify the command. The command is send to the device at start of movement of the Antenna Tower.}}
 +
{{ScreenElementDescription|Antenna Tower stopped|Text field to specify the command. The command is send to the device when the movement of the Antenna Tower stopped.}}
 +
{{ScreenElementDescription|Antenna Tower changed|Text field to specify the command. The command is send to the device when the Antenna Tower height has changed.}}
 +
{{ScreenElementDescription|Antenna Tower polarization|Text field to specify the command. The command is send to the device when the Antenna Tower Polarization has changed.}}
 +
}}
 +
 
 +
{{ScreenElementDescription|Turntable|
 +
{{ScreenElementDescription|Turntable started|Text field to specify the command. The command is send to the device at start of movement of the Turntable.}}
 +
{{ScreenElementDescription|Turntable stopped|Text field to specify the command. The command is send to the device when the movement of the Turntable stopped.}}
 +
{{ScreenElementDescription|Turntable changed|Text field to specify the command. The command is send to the device when the Turntable angle has changed.}}
 +
}}
  
 
[[Category:Configurable Drivers]]
 
[[Category:Configurable Drivers]]

Revision as of 09:07, 10 November 2015

The Configurable Switch Matrix device driver is a Switch Matrix which is supported by RadiMation®.

Links

This information about an equipment is automatically generated from the list of supported device drivers from RadiMation.
If you need more information you can contact radimation-support@raditeq.com.

Screenshot configurable switch matrix configuration window.png

When a text field is left empty, no command is being send.

ScreenElementDescription.png Device Driver
ScreenElementDescription.png Reset Text field to specify the reset command. The command is send to the device during the test initialization.
ScreenElementDescription.png Init Text field to specify the initialize command. The command is send to the device during the test initialization.
ScreenElementDescription.png Get ID Text field to specify the *IDN? query. The command is send to the device during the device check.
ScreenElementDescription.png Returned ID Text field to specify the expected respond to have the Get ID compared with. The string is used during the device check in case a query is specified.
ScreenElementDescription.png Deinit Text field to specify the deinitialize command. The command is send to the device during the test deinitialization.
ScreenElementDescription.png Operation
ScreenElementDescription.png During Test The command is send to the device just before starting the test.
ScreenElementDescription.png After Test The command is send to the device after finishing the test.
ScreenElementDescription.png After sending perform a read and discard result When selected the driver will perform a read after sending the command. Some device need to be read out before

sending the next command.

ScreenElementDescription.png Operation Complete
ScreenElementDescription.png Wait for Operation Completion after sending command(s) This will append the *OPC? to the commands being send.

Configurable switch matrix configuration window custom4.png

ScreenElementDescription.png Antenna Tower
ScreenElementDescription.png Antenna Tower started Text field to specify the command. The command is send to the device at start of movement of the Antenna Tower.
ScreenElementDescription.png Antenna Tower stopped Text field to specify the command. The command is send to the device when the movement of the Antenna Tower stopped.
ScreenElementDescription.png Antenna Tower changed Text field to specify the command. The command is send to the device when the Antenna Tower height has changed.
ScreenElementDescription.png Antenna Tower polarization Text field to specify the command. The command is send to the device when the Antenna Tower Polarization has changed.
ScreenElementDescription.png Turntable
ScreenElementDescription.png Turntable started Text field to specify the command. The command is send to the device at start of movement of the Turntable.
ScreenElementDescription.png Turntable stopped Text field to specify the command. The command is send to the device when the movement of the Turntable stopped.
ScreenElementDescription.png Turntable changed Text field to specify the command. The command is send to the device when the Turntable angle has changed.
Retrieved from "https://wiki.radimation.com/wiki/index.php?title=Configurable_Switch_Matrix&oldid=14428"