Difference between revisions of "RadiMation Application Note 100"
(→Table of Contents) |
|||
| Line 11: | Line 11: | ||
== Introduction == | == Introduction == | ||
| − | It is possible to configure RadiMation in such a way that | + | It is possible to configure RadiMation in such a way that several measurement parameters are shown in a larger font on a customized location. |
This functionality is called "enhanced status window", and can be configured in the RadiMation configuration dialog. | This functionality is called "enhanced status window", and can be configured in the RadiMation configuration dialog. | ||
This Application Note will explain how the Enhanced Status Window settings can be configured in {{RadiMation}}. | This Application Note will explain how the Enhanced Status Window settings can be configured in {{RadiMation}}. | ||
| − | It | + | It can be used by the EMC test engineer to provide clear status information during automatic EMC testing. |
At moment of writing the Enhanced Status Window is only implemented for the Singleband tests and will therefore not (correctly) work for the Multiband tests. | At moment of writing the Enhanced Status Window is only implemented for the Singleband tests and will therefore not (correctly) work for the Multiband tests. | ||
== Configuration == | == Configuration == | ||
| − | + | To configure this feature or to completely enable or disable it, go from the {{RadiMation}} main menu to: | |
{{Menu|Configuration|Configuration|Enhanced Status Window}} | {{Menu|Configuration|Configuration|Enhanced Status Window}} | ||
| Line 28: | Line 28: | ||
== Adding parameters == | == Adding parameters == | ||
| − | The text box before the | + | The text box before the {{ScreenElement|Add}} button can be used to specify the name of a measurement parameter. By pressing the {{ScreenElement|Add}} button the measurement parameter will be added to the list above it. All the measurement parameters that are included in the list will be shown during the test in a separate window. |
It is possible to add different parameters, which are available during a test. For example, the current frequency. To show the current frequency throughout the test, type "Frequency" in the text box and press the 'add' button. The item is now added to the list. It is possible to add this item multiple times, which will result that the information is also shown multiple times. | It is possible to add different parameters, which are available during a test. For example, the current frequency. To show the current frequency throughout the test, type "Frequency" in the text box and press the 'add' button. The item is now added to the list. It is possible to add this item multiple times, which will result that the information is also shown multiple times. | ||
| Line 38: | Line 38: | ||
The 'Font' button can be used to specify the font, the color and the size of the text in which the measurement parameters will be shown. The colored box behind the 'Background color:' will be the background color of the window in which the measurement parameters will be shown. | The 'Font' button can be used to specify the font, the color and the size of the text in which the measurement parameters will be shown. The colored box behind the 'Background color:' will be the background color of the window in which the measurement parameters will be shown. | ||
| − | == List of parameters == | + | == List of measurement parameters == |
| − | + | The following generic measurement parameters are possible: | |
| − | |||
* Frequency | * Frequency | ||
* Signal Power | * Signal Power | ||
| Line 61: | Line 60: | ||
* Power Offset Due To Conservation | * Power Offset Due To Conservation | ||
| − | AD-Converter: | + | The following measurement parameters related to the AD-Converter are possible: |
* AD Channel 1 | * AD Channel 1 | ||
* AD Channel 2 | * AD Channel 2 | ||
| Line 71: | Line 70: | ||
* AD Channel 8 | * AD Channel 8 | ||
| − | Field sensor: | + | The following measurement parameters related to the Field strength sensor are possible: |
* Field Sensor 1 | * Field Sensor 1 | ||
* Field Sensor 2 | * Field Sensor 2 | ||
Revision as of 09:58, 15 July 2015
Contents
Enhanced Status Window
 |
|
Table of Contents
Introduction
It is possible to configure RadiMation in such a way that several measurement parameters are shown in a larger font on a customized location. This functionality is called "enhanced status window", and can be configured in the RadiMation configuration dialog.
This Application Note will explain how the Enhanced Status Window settings can be configured in RadiMation®. It can be used by the EMC test engineer to provide clear status information during automatic EMC testing.
At moment of writing the Enhanced Status Window is only implemented for the Singleband tests and will therefore not (correctly) work for the Multiband tests.
Configuration
To configure this feature or to completely enable or disable it, go from the RadiMation® main menu to:
-
Configuration
- Configuration
- Enhanced Status Window
-
-
-
The following configuration window is shown:
Adding parameters
The text box before the Add button can be used to specify the name of a measurement parameter. By pressing the Add button the measurement parameter will be added to the list above it. All the measurement parameters that are included in the list will be shown during the test in a separate window.
It is possible to add different parameters, which are available during a test. For example, the current frequency. To show the current frequency throughout the test, type "Frequency" in the text box and press the 'add' button. The item is now added to the list. It is possible to add this item multiple times, which will result that the information is also shown multiple times.
Modifying Vertical or Horizontal
Modifying font
The 'Font' button can be used to specify the font, the color and the size of the text in which the measurement parameters will be shown. The colored box behind the 'Background color:' will be the background color of the window in which the measurement parameters will be shown.
List of measurement parameters
The following generic measurement parameters are possible:
- Frequency
- Signal Power
- Forward Power
- Reflected Power
- Modulation
- Average Field
- Calculated Field
- Voltage
- Calculated Voltage
- Current
- Calculated Current
- Measured Magnetic Field
- Generated Magnetic Field
- Out Power
- Harmonic Frequency
- Received Power At Antenna
- Desired Antenna Height
- Progress Antenna Height
- Power Offset Due To Conservation
The following measurement parameters related to the AD-Converter are possible:
- AD Channel 1
- AD Channel 2
- AD Channel 3
- AD Channel 4
- AD Channel 5
- AD Channel 6
- AD Channel 7
- AD Channel 8
The following measurement parameters related to the Field strength sensor are possible:
- Field Sensor 1
- Field Sensor 2
- Field Sensor 3
- Field Sensor 4
- Field Sensor 5
- Field Sensor 6
- Field Sensor 7
- Field Sensor 8
