RadiMation Application Note 100
Contents
Enhanced Status Window
 |
|
Introduction
It is possible to configure RadiMation in such a way that several measurement parameters are shown in a larger font on a customized location. This functionality is called "enhanced status window", and can be configured in the RadiMation configuration dialog.
This Application Note will explain how the Enhanced Status Window settings can be configured in RadiMation®. It can be used by the EMC test engineer to provide clear status information during automatic EMC testing.
At moment of writing the Enhanced Status Window is only implemented for the Singleband tests and will therefore not (correctly) work for the Multiband tests.
A preview of how the configured result could look like:
Configuration
To configure this feature or to completely enable or disable it, go from the RadiMation® main menu to:
-
Configuration
- Configuration
- Enhanced Status Window
-
-
-
The following configuration window is shown:
With the check box 'Custom status window' this feature can be enabled or disabled.
Adding and removing parameters
The text box before the Add button can be used to specify the name of a measurement parameter. By pressing the Add button the measurement parameter will be added to the list above it. All the measurement parameters that are included in the list will be shown during the test in a separate window.
It is possible to add different parameters, which are available during a test. For example, the actual used frequency during the test. To show the current frequency throughout the test, type "Frequency" in the text box and press this Add button. The item is now added to the list. It is possible to add this item multiple times, which will result that the information is also shown multiple times.
When a parameter has to be removed, select the parameter from the list and click at the Remove button.
Modifying Vertical or Horizontal
The horizontal and vertical setting will change the direction of the placement of the showed information. To make this even more clear how both configurations could look like when using the horizontal and vertical setting:
Using the horizontal setting:
Using the vertical setting:
Modifying font
The 'Font' button can be used to specify the font, the color and the size of the text in which the measurement parameters will be shown. The colored box behind the 'Background color:' will be the background color of the window in which the measurement parameters will be shown.
List of measurement parameters
The following generic measurement parameters are possible:
- Frequency
- Signal Power
- Forward Power
- Reflected Power
- Modulation
- Average Field
- Calculated Field
- Voltage
- Calculated Voltage
- Current
- Calculated Current
- Measured Magnetic Field
- Generated Magnetic Field
- Out Power
- Harmonic Frequency
- Received Power At Antenna
- Desired Antenna Height
- Progress Antenna Height
- Power Offset Due To Conservation
The following measurement parameters related to the AD-Converter are possible:
- AD Channel 1
- AD Channel 2
- AD Channel 3
- AD Channel 4
- AD Channel 5
- AD Channel 6
- AD Channel 7
- AD Channel 8
The following measurement parameters related to the Field strength sensor are possible:
- Field Sensor 1
- Field Sensor 2
- Field Sensor 3
- Field Sensor 4
- Field Sensor 5
- Field Sensor 6
- Field Sensor 7
- Field Sensor 8
