RadiMation Application Note 154

From RadiWiki

Revision as of 10:17, 16 October 2023 by Roge (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

How to perform a MIL-STD CS114, Conducted susceptibility, bulk cable injection test

This application note explains how the MIL-STD CS114, Conducted susceptibility, bulk cable injection test can be performed with RadiMation^®

The exact requirements and test methods for the CS114 are specified in the MIL-STD-461.

Necessary equipment

The following devices are necessary to execute this test:

Signal generator
Amplifier
Coupler
Forward power meter
Reflected power meter (optionally)
Current sensor
Sensor power meter / Analyser
50 Ohm load
50 Ohm attenuator
LISN
Current injection device
Current injection calibration jig (Calibration fixture)
Cable drivers with corrections

Configuration of the test sites

Calibration procedure

Verification

EUT Testing

Conclusion

Retrieved from "https://wiki.radimation.com/wiki/index.php?title=RadiMation_Application_Note_154&oldid=98980"