Difference between revisions of "RadiMation Error: 536871958"
(→Solution) |
(→No device driver is selected for the '' in the selected testsite.) |
||
| Line 1: | Line 1: | ||
= No device driver is selected for the '<DEVICE-TYPE>' in the selected testsite. = | = No device driver is selected for the '<DEVICE-TYPE>' in the selected testsite. = | ||
| − | RadiMation is trying to load all the necessary devices from the selected test-site, however the | + | {{RadiMation}} is trying to load all the necessary devices from the selected test-site, however the test-site doesn't have a device driver selected for the specified '<DEVICE-TYPE>', while this is needed for the configured test. |
| − | test-site doesn't have a device driver selected for the specified '<DEVICE-TYPE>'. | ||
== Solution == | == Solution == | ||
Revision as of 13:57, 21 September 2016
No device driver is selected for the '<DEVICE-TYPE>' in the selected testsite.
RadiMation® is trying to load all the necessary devices from the selected test-site, however the test-site doesn't have a device driver selected for the specified '<DEVICE-TYPE>', while this is needed for the configured test.
Solution
- Change the configuration of the test-site, to include a device driver for the specified '<DEVICE-TYPE>'.
- If this error is unexpectedly raised for a 'Forward power meter' not being present in the testsite, this is probably caused by the forward power amplifier protection that is configured for the amplifier within the testsite. If you are sure that you want to use the amplifier without a forward power amplifier protection, the maximum forward power correction file of the amplifier should be removed.
- If this error is unexpectedly raised for a 'Reflected power meter' not being present in the testsite, this is probably caused by the reflected power amplifier protection that is configured for the amplifier within the testsite. If you are sure that you want to use the amplifier without a reflected power amplifier protection, the maximum reflected power correction file of the amplifier should be removed.
