Release Notes/Solved items Version 2016.1

RadiMation version 2016.1.5

• #5344: ESPI -222 Data out of range error
• #5434: Driver: Agilent N9038A, 44 GHz option
• #5480: Throw error or warning when 'Step Size clipped to nearest value allowed' for Agilent MXE N9038
• #5694: Driver Amplifiers Ophir 5225E / 5264E / 5274E
• #5786: Possibility to specify the 'auto-switch off' time of the PMM EP600-series probe
• #5956: Units change from dBm to W in the Power Meter Module does only change unit text
• #6273: Logarithmic step frequency for the Agilent N9038A
• #6310: Reference level of the N9038A is not set to the specified reference level in the TSF
• #6458: Several improvements and issues for the Agilent MXE EMI Receiver N9038A
• #6682: Driver Schwarzbeck MDS21
• #6683: Driver Schwarzbeck MDS22
• #6684: Driver Schwarzbeck LISN's
• #6685: Driver: Schwarzbeck VULB 9162
• #6688: Driver: Bonn Elektronik amplifier BSA 0125-25
• #6689: Driver Bonn Elektronik BSA series amplifiers
• #6718: Numbers on Analog scale of Virtual instrument should be updated when unit is changed
• #6792: Agilent N9038A: Non EMI average detector is change due to physcial constraints
• #6921: Driver: Agilent N5171B-506 + UNT
• #6940: Driver Bonn BSA 0122-20
• #7092: Longer time till sleep mode Narda EP600/EP601
• #7163: Errors connecting Lutron field probe
• #7170: Actual RH values no longer visible.
• #7173: Searching for possibility to download latest RadiMation version for driver release
• #7175: Wrong commands for Maturo ncd for antenna and turntable
• #7185: Unable to install the newest version, only HTTP and FTP are supported
• #7188: Advantest TR4172 No match was found in the specified regular expression
• #7194: Driver: Antenna Tower Inn-co GmbH MA4000
• #7208: Checksum error with the EMTEST CWS500N1.2
• #7217: Unexpected response from the Narda EP600 after filter setting command
• #7220: Driver: Vectawave VBA1000-1000
• #7238: Report generator text unexpected in bold.
• #7241: Sending an error report takes a long time (roughly 1 minute)
• #7246: Forward power and signal power graphs are not shown anymore in already performed tests
• #7302: Re-measuring peak values increases the measurement with 10 dB

RadiMation version 2016.1.4

• #423: Configuration of customer database is not retained
• #4809: Driver: Hameg HMS3010 Spectrum Analyser
• #5211: Driver: Maturo NCD controller advanced error checking
• #5228: HP8594E GPIB error
• #5314: RadiMation database table and fields are sometimes not retained
• #5492: System error checking on HP 8562/8563 causes communication errors
• #5969: R&S ESU EMI receiver is only set to integer frequency values
• #6175: Driver: Thermo Scientific EMCPro-PLUS
• #6429: Peak Maximise settings change doesn't work
• #6795: Graphs and table overviews are mixed-up and not correctly displayed
• #6810: Driver: Lutron EMF-819 Fieldsensor
• #6839: Forward power column in the table of Amplifier linearity is not showing the first powerlevel
• #6871: Driver: Hameg HM8135
• #6902: Keywords TEST SITE EMAIL ADDRESS and CLIENT EMAIL ADDRESS are not working anymore
• #6957: Not possible to export a fixed field to a CAL file, errors is shown that modulation was used is shown while this is not the case
• #7004: Pasting large data (19000 rows) into a COR file is crashing RadiMation
• #7032: GPIB communication is slower with newer drivers
• #7033: Unknown error message RadiField. Error 530
• #7040: Marconi signal generator doesn't respond on *STB?
• #7045: Cannot find Modulation source in the currently active testsite
• #7052: Crash: CE MB Antenna Terminal measurements
• #7056: 1st correction file selection of antenna shows: 'Select a correction file'
• #7057: HP 8594E analyser as a power meter returns Not all bytes are written to the GPIB-Board
• #7061: Graphs and table of Amplifier linearity test is unlogical
• #7075: sorting of columns of the peak table is not working correctly
• #7076: Exporting field strength to calibration is not working, because a modulation is selected, even if 'No Modulation' is selected
• #7084: HP85xx-series: Incorrect measurement: Emission values up to 330 dBuV/m
• #7086: Setup downloads .NET 4.6 instead of .NET 4.6.1
• #7094: Bonn amplifier should be placed in REMOTE, also on GPIB
• #7105: Unlogical Red cross in AD Configuration dialog
• #7108: Selection of CapacitiveClamp on EMTest UCS500N not correct
• #7113: Polar graph is not drawn correctly, when the window has been maximized
• #7117: Driver TTi TGR2050 Synthesised RF Generator
• #7119: RadiMation does not start up after modifying global/standalone directory
• #7124: Object reference not set to an instance of an object: Frequency drawing of bands control
• #7127: Font of the legend on the polar plot is much smaller than on the frequency graph
• #7128: Index was outside the bounds of the array error 536879965
• #7136: Unable to report error manually
• #7138: Issue with our home made 40 channel AD Converter
• #7141: AD Converter error during test initialization
• #7145: Output of multiple channels using LeCroy WaveSurfer Channel switch matrix driver during single band test

RadiMation version 2016.1.3

• #6311: Crash when maximizing the MB Emission test result window
• #6333: RadiMation crashes when maximizing the multi-band emissions results screen
• #6430: Radimation crash if radiated emission window resized during measurement
• #6686: Driver Luthi FT/FTC series absorbing clamps
• #6715: Run-time error 5 procedure call or argument is not valid in RADRESRC.DLL
• #6896: Error timeout with Maturo MCU controller
• #7017: SYST:ERR -222:Data out of range for RadiGen
• #7020: Limit lines are not shown automatically at the end of the test
• #7022: Maximum cable length is not included in the ||EUT|CABLE TABLE|| in the report

RadiMation version 2016.1.2

• #5587: Old LLF is not removed and not replaced with newly added LLF
• #5969: R&S ESU EMI receiver is only set to integer frequency values
• #6393: Graph is covering a rang and analyser is performing a test outside the specified bands
• #6464: Automatic search of highest peaks is changing graph shape
• #6466: Driver R&S FSL
• #6470: Driver R&S NRP2 powermeter
• #6518: FSU 3 error -200 Option ot available INP:PRES:STAT ON during test initialization
• #6723: Broadband disturbances are showed as peaks
• #6804: AD converter values of older tests are not correctly showed in latest versions
• #6865: Implement retry of Software Update used for RadiField amplifier firmware updating
• #6903: Add an additional 'Maximum cable length' field for a cable in the EUT
• #6904: Add a note field to a cable
• #6912: RadiLog icon disappears when pinned to the taskbar
• #6972: RadiLog is not able to write to temporary directory
• #6981: Setup program doesn't check if .NET framework 4.6.1 is installed
• #6985: Advantest TR4172 as powermeter is not correctly measuring
• #6986: RadiLog icon disappears when pinned to the taskbar
• #6988: R&S FSU: Not possible to select 50 MHz RBW
• #6991: How to determine the compression level using a constant output power test
• #6992: Software update will crash RadiMation when a connection error is found
• #6993: RGN Setting the output level raised an error
• #6994: R&S FSU undefined header -113 INP:TYPE INPUT1 error
• #6999: Time interval of table data from a multiband immunity test in the report skips rows if a large delay was present during the test
• #7005: Limitlines are not shown when old test results are opened
• #7008: Reflected power too high
• #7011: RGN software update panel should be hidden
• #7012: Implement checking of system errors for RGN
• #7014: Report Generator can be used without a license

RadiMation version 2016.1.1

• #5988: Driver Teseq ITS6006 for IEC61000-4-3 & CISPR11 as Signal Generator
• #6556: Update the CD Start menu for 2016.1
• #6558: Update version and copyright years to 2016
• #6965: Add ability to return the RAW AD Converter value
• #6983: Empty tabs and no labels are shown after fresh installation
• #6998: Data table from Multiband Immunity in the report generator is always using time interval mode
• #7003: Device check of the R&S SMB100A is unsuccessful