Release Notes/Solved items Version 5.7

RadiMation version 5.7.2

• #2204: Add a peak by clicking on the emission graph
• #2920: disable zoom in does not work directly
• #3073: Trace gaps on emission plots
• #3497: Keithley 2000 scanner does not detect connected device correctly
• #3502: RadiMation stays in a never ending loop to zoom the peak
• #3565: Negative turntable angles should be allowed in combination with the "measure during turn" option
• #3584: Wrong value readout of LeCroy 9361 scope
• #3628: Overloaded driver of the ESU is crashing then the device *IDN? description is not in capitals
• #3629: Changing the test order before reporting is crashing the RadiMation
• #3630: Driver: Maturo NCD
• #3634: Scaling in CE multiband is going to -1000 during the test.
• #3639: Driver: AH system SAS-570
• #3640: Driver: AH system SAS-571
• #3642: Driver: AH system SAS-550-1B
• #3643: Driver: AH system SAS-560
• #3649: Driver: HP 8673E
• #3650: Driver: HP 8662A
• #3654: Driver: IFI SMCC10
• #3655: Driver: OPHIR 5163
• #3657: Driver: HP 8341B
• #3658: Driver: Solar 6338-5-PJ-50N
• #3659: Driver: Solar 9233-50TS-50N
• #3661: Driver: Solar 7334-1
• #3662: Driver: Electro metrics EM-6892
• #3663: Driver: Electro metrics EM-6960
• #3664: Driver: Electro metrics EM-6961
• #3665: Driver: Electro metrics EM-6876
• #3668: Driver: Solar 9251-1
• #3673: Peak selection is not working as expected after deselecting all the peaks
• #3675: Configuration for optimize angle and height has problems with the measure- and observation time of different detectors
• #3676: During Optimize Height actual defined settings are not used but settings defined a step before
• #3677: When you press <<Detect Peaks>> after a radiated emission test in multiband you can not select more than one peak afterwards.
• #3678: Peak detected in first band but not in second band
• #3680: Configurable device signal generator device driver is not taking the correct codes in version 5.6.9
• #3682: Emission multiband is slow when 200 peak sweeps are used
• #3692: Prana amplifier does not turn off when the amplifier is changed during manual mode

RadiMation version 5.7.1

• #1948: No gridlines are shown from 1 GHz to 2 Ghz in logarithmic mode
• #2599: Order of tested bands should have a preference for the frequency order
• #2681: Editing a testlevel when multiple bands are selected, only changed the variable test-level for the first selected band
• #2754: Dongle is not detected when using Remote Desktop.
• #2756: Frequency Label of the x-axis of the graph in a correction file is displayed too low
• #2775: Measurement of current by using the current sensor in combination with a multimeter or oscilloscope is wrong
• #2866: How can scaling of frequency axis be configured when logarithmic scaling is choosen?
• #2911: dBmA/m unit in multi band is giving wrong measurement information
• #2999: Order of the bands in Multiband immunity is random
• #3141: Test equipment wrong in Sequence mode
• #3416: AM modulation indication on the HP 83630 is not activated
• #3454: Term MHz in Graph while the values are also in MHz.
• #3617: Driver: Anapico APSIN300HC
• #3621: No virtual multi meter available in version 5.7.0
• #3622: January and February dates are not detected on a non-english PC
• #3623: RI Magnetic calibration are not displayed after RadiMation is restarted
• #3625: New bands in a multiband test always have the color black
• #3626: Driver: R & S FSV 3
• #3627: Driver: R & S FSU 3
• #3632: Carrier level jumps directly from -100 dBm to +1 dBm when it should go up 1 dBm

RadiMation version 5.7.0

• #1937: Esi startup problem(s)
• #1986: Switching to the next band takes more then 2 minutes
• #2479: Driver: 1000W1000C
• #2557: FSP30 as power meter driver
• #3164: Cable correction between the signal generator and the amplifier is performed in the wrong direction
• #3494: ESU Time Domain Scan Fails when using lan
• #3551: R&S ESxx receivers: Perform short calibration before the final measurements
• #3560: R&S ESxx receivers: Enable demodulator
• #3568: SMR 20 does not support the external PM modulation
• #3569: strange behaviour after driver package update ESVS10
• #3575: Driver: Emco 3104C antenna
• #3576: Problems with deinitialization of ESVS10
• #3585: For a configurable LISN no manual mode is included
• #3586: CE multiband LISN test does not perform the band measurement
• #3587: driver for R&S SMC-B103
• #3588: The note on the multiband test window cannot be changed
• #3589: Note textbox on multiband tests, is not showing scrollbars
• #3590: Final peak measurement is performed too often
• #3591: Report generator is using more than 500 MB of memory
• #3617: Driver: Anapico APSIN300HC
• #3618: Driver: 30S1G4
• #3619: Driver: ETS EMCO 3142D
• #3620: Driver: Narda 6630