Difference between revisions of "Rohde & Schwarz NRP-Z91"
(→Example of installation) |
DevicesBot (talk | contribs) (Updated DeviceDriverInfo template) |
||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 4: | Line 4: | ||
|DeviceDriverName=RSNRPZ91 | |DeviceDriverName=RSNRPZ91 | ||
|DeviceType=NRP-Z91 | |DeviceType=NRP-Z91 | ||
| + | |HideAutoData=1 | ||
|SupportedDeviceTypes=8 | |SupportedDeviceTypes=8 | ||
| − | }}The NRP-Z91 is a | + | }} |
| + | The [[Rohde & Schwarz]] NRP-Z91 is a power meter with a diode head connected by USB to the PC. | ||
= Notes = | = Notes = | ||
| − | *The driver can only be used if the program NRPView, 1.0.27 | + | * The {{RadiMation}} device driver can only be used if the program NRPView, 1.0.27 or above, from [[Rohde & Schwarz]] is installed. When installing the program make sure that you install all the items. If not all items are installed, some required dll's are not installed. |
* Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured. | * Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured. | ||
| − | *The syntax for the Instrument Descriptor is following: | + | * The syntax for the Instrument Descriptor is following: |
USB::<vendor Id>::<product Id>::<serial number> | USB::<vendor Id>::<product Id>::<serial number> | ||
| − | where <vendor Id> is | + | where <vendor Id> is 0AAD for Rohde&Schwarz |
<product Id> depends on the sensor | <product Id> depends on the sensor | ||
| − | NRP-Z21 : 0x0003 | + | NRP-Z21 : 0x0003 |
| − | NRP-FU | + | NRP-FU : 0x0004 |
| − | FSH-Z1 | + | FSH-Z1 : 0x000B |
| − | NRP-Z11 : | + | NRP-Z11 : 0x000C |
| − | NRP-Z22 : 0x0013 | + | NRP-Z22 : 0x0013 |
| − | NRP-Z23 : 0x0014 | + | NRP-Z23 : 0x0014 |
| − | NRP-Z24 : 0x0015 | + | NRP-Z24 : 0x0015 |
| − | NRP-Z51 : 0x0016 | + | NRP-Z51 : 0x0016 |
| − | NRP-Z52 : 0x0017 | + | NRP-Z52 : 0x0017 |
| − | NRP-Z55 : 0x0018 | + | NRP-Z55 : 0x0018 |
| − | FSH-Z18 : | + | NRP-Z56 : 0x0019 |
| − | NRP-Z91 : 0x0021 | + | FSH-Z18 : 0x001A |
| − | NRP-Z81 : 0x0023 | + | NRP-Z91 : 0x0021 |
| − | NRP-Z37 : | + | NRP-Z81 : 0x0023 |
| − | NRP-Z27 : | + | NRP-Z31 : 0x002C |
| + | NRP-Z37 : 0x002D | ||
| + | NRP-Z96 : 0x002E | ||
| + | NRP-Z27 : 0x002F | ||
| + | NRP-Z28 : 0x0051 | ||
| + | NRP-Z98 : 0x0052 | ||
| + | NRP-Z92 : 0x0062 | ||
| + | NRP-Z57 : 0x0070 | ||
| + | NRP-Z85 : 0x0083 | ||
| + | NRPC40 : 0x008F | ||
| + | NRPC50 : 0x0090 | ||
| + | NRP-Z86 : 0x0095 | ||
| + | NRP-Z41 : 0x0096 | ||
| + | NRP-Z61 : 0x0097 | ||
| + | NRP-Z71 : 0x0098 | ||
| + | NRP-Z32 : 0x009A | ||
| + | NRP-Z211 : 0x00A6 | ||
| + | NRP-Z221 : 0x00A7 | ||
| + | NRP-Z58 : 0x00A8 | ||
| + | NRPC33 : 0x00B6 | ||
| + | NRPC18 : 0x00Bf | ||
| + | NRPC18-B1 : 0x00C1 | ||
| + | NRPC33-B1 : 0x00C2 | ||
| + | NRPC40-B1 : 0x00C3 | ||
| + | NRPC50-B1 : 0x00C4 | ||
| + | NRP8S : 0x00E2 | ||
| + | NRP8SN : 0x0137 | ||
| + | NRP18S : 0x0138 | ||
| + | NRP18SN : 0x0139 | ||
| + | NRP33S : 0x0145 | ||
| + | NRP33SN : 0x0146 | ||
| + | NRP18S-10 : 0x0148 | ||
| + | NRP18SN-10 : 0x0149 | ||
| + | NRP18S-20 : 0x014A | ||
| + | NRP18SN-20 : 0x014B | ||
| + | NRP18S-25 : 0x014C | ||
| + | NRP18SN-25 : 0x014D | ||
| + | NRP18A : 0x014E | ||
| + | NRP18AN : 0x014F | ||
| + | NRP18T : 0x0150 | ||
| + | NRP18TN : 0x0151 | ||
| + | NRP33T : 0x0152 | ||
| + | NRP33TN : 0x0153 | ||
| + | NRP40T : 0x0154 | ||
| + | NRP40TN : 0x0155 | ||
| + | NRP50T : 0x0156 | ||
| + | NRP50TN : 0x0157 | ||
| + | NRP67T : 0x0158 | ||
| + | NRP67TN : 0x0159 | ||
| + | NRP110T : 0x015A | ||
| + | NRP40S : 0x015F | ||
| + | NRP40SN : 0x0160 | ||
| + | NRP50S : 0x0161 | ||
| + | NRP50SN : 0x0162 | ||
| + | NRP33SN-V : 0x0168 | ||
| + | NRP6A : 0x0178 | ||
| + | NRP6AN : 0x0179 | ||
| + | NRPM3 : 0x0195 | ||
<serial number> you can find on your sensor. Serial number is number | <serial number> you can find on your sensor. Serial number is number | ||
| − | with 6 digits. For example | + | with 6 digits. For example 900003 |
| − | Examples: "USB:: | + | Examples: "USB::0x0AAD::0x000B::900003" |
| − | You can use '*' for product | + | You can use '*' for <product Id> or <serial number>. We suggest to use fully |
| − | when you have connected more | + | qualified resource descriptors, when you have connected more than one sensor. |
| + | You can use the asterisk placeholder, when only one sensor is connected. | ||
| + | Examples: | ||
| + | * "USB::0x0AAD::0x000C::*" - Opens first NRP-Z11 sensor on the USB bus | ||
| + | * "USB::0x0AAD::*" - Opens first R&S sensor on the USB bus | ||
| + | * "*" - Opens first R&S sensor on the USB bus | ||
| + | |||
| + | == Related RadiMation errors == | ||
* RadiMation Error: -1074001424("Instrument status error"), when doing a zero of the power meter. the power on the head is too much, decrease the power and try again. | * RadiMation Error: -1074001424("Instrument status error"), when doing a zero of the power meter. the power on the head is too much, decrease the power and try again. | ||
| − | == | + | == Installation == |
| − | + | Please go the official website of the manufacturer [[Rohde & Schwarz]] and go to the page of your R&S®NRP Average Power Sensor model. [http://www.rohde-schwarz.com/en/product/nrpz91-productstartpage_63493-8584.html] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | Please go the official website of the manufacturer Rohde & Schwarz and go to the page of your R&S®NRP Average Power Sensor model. | ||
| − | |||
| − | |||
| − | + | Apparently the required component for this driver is the R&S® NRP-Toolkit. Install this toolkit first: https://cdn.rohde-schwarz.com/pws/dl_downloads/dl_software/exe/NRPToolkit-4.15.6675.13278.exe | |
| − | |||
| − | |||
[[Category:RadiMation]] | [[Category:RadiMation]] | ||
[[Category:Power Meter]] | [[Category:Power Meter]] | ||
[[Category:Rohde & Schwarz]] | [[Category:Rohde & Schwarz]] | ||
Latest revision as of 02:02, 5 March 2024
The Rohde & Schwarz NRP-Z91 device driver is a Power Meter which is supported by RadiMation®. The Rohde & Schwarz NRP-Z91 is a power meter with a diode head connected by USB to the PC.
Notes
- The RadiMation® device driver can only be used if the program NRPView, 1.0.27 or above, from Rohde & Schwarz is installed. When installing the program make sure that you install all the items. If not all items are installed, some required dll's are not installed.
- Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured.
- The syntax for the Instrument Descriptor is following:
USB::<vendor Id>::<product Id>::<serial number>
where <vendor Id> is 0AAD for Rohde&Schwarz
<product Id> depends on the sensor
NRP-Z21 : 0x0003
NRP-FU : 0x0004
FSH-Z1 : 0x000B
NRP-Z11 : 0x000C
NRP-Z22 : 0x0013
NRP-Z23 : 0x0014
NRP-Z24 : 0x0015
NRP-Z51 : 0x0016
NRP-Z52 : 0x0017
NRP-Z55 : 0x0018
NRP-Z56 : 0x0019
FSH-Z18 : 0x001A
NRP-Z91 : 0x0021
NRP-Z81 : 0x0023
NRP-Z31 : 0x002C
NRP-Z37 : 0x002D
NRP-Z96 : 0x002E
NRP-Z27 : 0x002F
NRP-Z28 : 0x0051
NRP-Z98 : 0x0052
NRP-Z92 : 0x0062
NRP-Z57 : 0x0070
NRP-Z85 : 0x0083
NRPC40 : 0x008F
NRPC50 : 0x0090
NRP-Z86 : 0x0095
NRP-Z41 : 0x0096
NRP-Z61 : 0x0097
NRP-Z71 : 0x0098
NRP-Z32 : 0x009A
NRP-Z211 : 0x00A6
NRP-Z221 : 0x00A7
NRP-Z58 : 0x00A8
NRPC33 : 0x00B6
NRPC18 : 0x00Bf
NRPC18-B1 : 0x00C1
NRPC33-B1 : 0x00C2
NRPC40-B1 : 0x00C3
NRPC50-B1 : 0x00C4
NRP8S : 0x00E2
NRP8SN : 0x0137
NRP18S : 0x0138
NRP18SN : 0x0139
NRP33S : 0x0145
NRP33SN : 0x0146
NRP18S-10 : 0x0148
NRP18SN-10 : 0x0149
NRP18S-20 : 0x014A
NRP18SN-20 : 0x014B
NRP18S-25 : 0x014C
NRP18SN-25 : 0x014D
NRP18A : 0x014E
NRP18AN : 0x014F
NRP18T : 0x0150
NRP18TN : 0x0151
NRP33T : 0x0152
NRP33TN : 0x0153
NRP40T : 0x0154
NRP40TN : 0x0155
NRP50T : 0x0156
NRP50TN : 0x0157
NRP67T : 0x0158
NRP67TN : 0x0159
NRP110T : 0x015A
NRP40S : 0x015F
NRP40SN : 0x0160
NRP50S : 0x0161
NRP50SN : 0x0162
NRP33SN-V : 0x0168
NRP6A : 0x0178
NRP6AN : 0x0179
NRPM3 : 0x0195
<serial number> you can find on your sensor. Serial number is number
with 6 digits. For example 900003
Examples: "USB::0x0AAD::0x000B::900003"
You can use '*' for <product Id> or <serial number>. We suggest to use fully qualified resource descriptors, when you have connected more than one sensor. You can use the asterisk placeholder, when only one sensor is connected.
Examples:
- "USB::0x0AAD::0x000C::*" - Opens first NRP-Z11 sensor on the USB bus
- "USB::0x0AAD::*" - Opens first R&S sensor on the USB bus
- "*" - Opens first R&S sensor on the USB bus
Related RadiMation errors
- RadiMation Error: -1074001424("Instrument status error"), when doing a zero of the power meter. the power on the head is too much, decrease the power and try again.
Installation
Please go the official website of the manufacturer Rohde & Schwarz and go to the page of your R&S®NRP Average Power Sensor model. [1]
Apparently the required component for this driver is the R&S® NRP-Toolkit. Install this toolkit first: https://cdn.rohde-schwarz.com/pws/dl_downloads/dl_software/exe/NRPToolkit-4.15.6675.13278.exe
