Difference between revisions of "Rohde & Schwarz NRP-Z91"
(→notes) |
|||
Line 7: | Line 7: | ||
}}The NRP-Z91 is a USB Power meter with a diode head. | }}The NRP-Z91 is a USB Power meter with a diode head. | ||
− | = | + | = Notes = |
*The driver can only be used if the program NRPView, 1.0.27 and above, from R & S is installed. When installing the program make sure that you install all the items. if you do not do this, some dll's will not be copied. | *The driver can only be used if the program NRPView, 1.0.27 and above, from R & S is installed. When installing the program make sure that you install all the items. if you do not do this, some dll's will not be copied. | ||
* Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured. | * Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured. | ||
Line 47: | Line 47: | ||
To get these dll's install the vxipnp driver from the CD supplied with the device. | To get these dll's install the vxipnp driver from the CD supplied with the device. | ||
+ | |||
+ | == Tips during installation == | ||
+ | Please go the official website of the manufacturer Rohde & Schwarz and go to the page of your R&S®NRP Average Power Sensor model. For example: [http://www.rohde-schwarz.com/en/product/nrpz91-productstartpage_63493-8584.html] | ||
+ | |||
+ | Apparently the required component for this driver is the R&S®NRP-Toolkit. Install this toolkit first: [http://cdn.rohde-schwarz.com/pws/dl_downloads/dl_software/exe/NRP-Toolkit_3_1_0_2.exe] | ||
+ | |||
+ | Select Drivers from the menu on the right side of the web page. Now scroll down to the table of Instrument Driver and download the VXIplug&play x86 Driver rsnrpz driver. | ||
+ | Install these Rohde & Schwarz drivers: http://cdn.rohde-schwarz.com/pws/dl_downloads/dl_driver/rsnrpz/rsnrpz_vxipnp_2_37_0_32bit.exe | ||
+ | |||
+ | Here is explained how to connect the Powermeter with RadiMation: http://wiki.dare.nl/wiki/index.php/Rohde_%26_Schwarz_NRP-Z91 | ||
+ | |||
+ | Afterwards the dll’s should be installed at C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin\ and C:\Windows\SysWOW64\. | ||
[[Category:RadiMation]] | [[Category:RadiMation]] | ||
[[Category:Power Meter]] | [[Category:Power Meter]] | ||
[[Category:Rohde & Schwarz]] | [[Category:Rohde & Schwarz]] |
Revision as of 14:58, 28 October 2014
The Rohde & Schwarz NRP-Z91 device driver is a Power Meter which is supported by RadiMation®.
Related pages
Links
- Google search: Rohde & Schwarz NRP-Z91
- Google image search: Rohde & Schwarz NRP-Z91
This information about an equipment is automatically generated from the list of supported device drivers from RadiMation. |
If you need more information you can contact radimation-support@raditeq.com. |
The NRP-Z91 is a USB Power meter with a diode head.
Notes
- The driver can only be used if the program NRPView, 1.0.27 and above, from R & S is installed. When installing the program make sure that you install all the items. if you do not do this, some dll's will not be copied.
- Setting the resolution higher will make the measurement slower because the power meter is taking more samples and perform an average over the samples. this is done dynamically depending on the power measured.
- The syntax for the Instrument Descriptor is following:
USB::<vendor Id>::<product Id>::<serial number>
where <vendor Id> is 0aad for Rohde&Schwarz
<product Id> depends on the sensor NRP-Z21 : 0x0003 NRP-FU : 0x0004 FSH-Z1 : 0x000b NRP-Z11 : 0x000c NRP-Z22 : 0x0013 NRP-Z23 : 0x0014 NRP-Z24 : 0x0015 NRP-Z51 : 0x0016 NRP-Z52 : 0x0017 NRP-Z55 : 0x0018 FSH-Z18 : 0x001a NRP-Z91 : 0x0021 NRP-Z81 : 0x0023 NRP-Z37 : 0x002d NRP-Z27 : 0x002f <serial number> you can find on your sensor. Serial number is number with 6 digits. For example 9000003
Examples: "USB::0x0aad::0x000b::100000"
You can use '*' for product id or serial number. We suggest full resource descriptor, when you have connected more sensors. You can use asterix, when one sensor is connected.
- RadiMation Error: -1074001424("Instrument status error"), when doing a zero of the power meter. the power on the head is too much, decrease the power and try again.
dll(s) needed
The dll needed to use this device is changed by Rohde & Schwarz. so now you can use:
- NrpControl2.dll
- rsnrpz_32.dll
To get these dll's install the vxipnp driver from the CD supplied with the device.
Tips during installation
Please go the official website of the manufacturer Rohde & Schwarz and go to the page of your R&S®NRP Average Power Sensor model. For example: [1]
Apparently the required component for this driver is the R&S®NRP-Toolkit. Install this toolkit first: [2]
Select Drivers from the menu on the right side of the web page. Now scroll down to the table of Instrument Driver and download the VXIplug&play x86 Driver rsnrpz driver. Install these Rohde & Schwarz drivers: http://cdn.rohde-schwarz.com/pws/dl_downloads/dl_driver/rsnrpz/rsnrpz_vxipnp_2_37_0_32bit.exe
Here is explained how to connect the Powermeter with RadiMation: http://wiki.dare.nl/wiki/index.php/Rohde_%26_Schwarz_NRP-Z91
Afterwards the dll’s should be installed at C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin\ and C:\Windows\SysWOW64\.