Release Notes/Solved items Version 2022.1
Jump to navigation
Jump to search
RadiMation version 2022.1.2[edit]
- #5196: Allow to measure multiple detectors simultaneously during continuous measure
- #7849: Ability to save invalid TSF files and LLF files
- #11321: TSF file of Burst/Surge test cannot be saved when no cable is selected yet
- #11631: TSF cannot be saved if no protection key is present
- #11861: ErrorReport: "*.TSF file change without dongle not possible!"
- #11891: report generator text editor should not include RAW OADateTime values when generating reports
- #12151: Possibility to save an incomplete configured TSF file to disk
- #12158: RadiMation force closes when the process cannot acces the RadiLog file, because it is in use by another process.
- #12231: Driver: AFJ FFT3110.
- #12263: VI instrument window graph control are moved of the visible area when resizing the form
- #12321: Application note for close proximity magnetic field testing
- #12359: Save *.TSF file without dongle not possible!
- #12399: Error @ Restart last TSF
- #12402: Limit lines are not shown when applying filter settings
- #12404: Clean up invoke related code implemented on the RadiMation mainWindow
- #12406: Add notification bar too the MB field probe test level, stating that multiple probes will be averaged
- #12412: Device driver related UI components are not functioning as intented
- #12446: SpinUpDownControl shows white text on white background.
- #12464: Extend AD-Convertor driver for Tektronix TDS2000 series to allow USB connection.
- #12536: Dark skin white border at Note and Address information.
- #12539: issue 2022-03-30 AL1: frequency graph switch from log to lin after switching to Angle view.
- #12544: Sequence overview menu item stays active when cancelled.
- #12545: Connection problem
- #12553: TDEMI: Support multiple final detectors in parallel
- #12554: Ethernet Driver required for Agilent 33220A.
- #12576: Error final peak measurement R&S ESPI3 with RadiMation 2021.3.5
- #12588: When resizing the Pulse modulation configuration, the "Apply out of dwell time" is moved under the pulse gating frame
- #12601: Export of limitlines is showing a stepped instead of constant slope.
- #12603: No export was possible of measurement T21 due to out of memory.
- #12167: Validate LLF files at the start of test
- #12622: Start and stop frequency on UFA calculation printout are always zero
- #12623: Opening a unfinished PI data document will start a test without warning
- #12627: The maximum frequency is 10 GHz in the 'Free' and 'Essential' license types
- #12628: Control of an EUT controller is not allowed in the 'Essential' license type
- #12629: Control of a positioner is not allowed in the 'Essential' license type
- #12630: Change references to RadiMation Lite license to RadiMation Essential
- #12636: The about window shows that the RadiMation 'Pro' license is used
- #12637: Timeout while data transfer.
- #12641: CI calibration error.
- #12656: Logarithmic step frequency, starting from shows: -10000000000000 MHz
- #12661: Driver: RadiSwitch RSW1022V and RSW1024V.
- #12662: AM square wave modulation on Keysight N5171B generator.
- #12672: unable to split cells during template generation.
- #12700: Trial period of RadiMation Pro-error with start of test
- #12747: RS10 probe connect niet
- #12578: Antennerotator rotates to -3.8 degrees instead of 356.2 degrees
- #12762: How to change the Default Setting of Receiver Setting in the Software
- #12817: GPIB error: Hibernated NI drivers error. Restart your PC
- #4668: Allow to measure multiple detectors simultaneously during final measurement
RadiMation version 2022.1.1[edit]
- #9256: Update the SX32W to the latest version released by Safenet.
- #12125: The border of the non-maximized MDI child window is very narrow. Please enlarge it.
- #12126: Show the title bar of a passive MDI child window in a different colour than the active MDI child window
- #12127: Allow that end-user can select another skin.
- #12245: If only a single fieldprobe is measured, it will be used as the average field, even if it is not selected to be included in the average calculation
- #12278: RadiLog shows key-value pairs on the General tab instead of on the Input or Output tab
- #12282: Automatically focus the sequence overview window when the last test of the sequence is finished
- #12283: Option to select if the sequence window should remain open or close automatically.
- #12337: Copy the RadiPower USB drivers from DRIVERS.EXE to a sub-directory to allow manual driver installation.
- #12362: incorrect status info sequence.
- #12392: Skin is not applied correctly when switchen from the windows default to another skin.
- #12417: error while applying new skin.
- #12441: The corners of the buttons on the VI windows have white pixels in a dark skin.
- #12442: Unexpected borders are shown around buttons on some skins.
- #12444: Forms having a fixed light colour even using darker skins
- #12529: Driver: SCHAFFNER EMI Receiver SCR 3502 (RS232).
- #12534: AW: Export from Version 2021.3.5 => Out of Memory.
- #12628: Control of an EUT controller is not allowed in the 'Essential' license type
- #12629: Control of a positioner is not allowed in the 'Essential' license type
- #12631: The main window title bar includes 'RadiMation Essential' when the Essential license is used
- #12643: Voltage dips test
- #12663: Rohde & Schwarz BBA150 connection error