Difference between revisions of "Rohde & Schwarz NRX"

Revision as of 09:23, 20 March 2020

= How to configure the GPIB Adress for the R&S NRX =

1) Open the settings menu of the NRX. 
2) Open the connection settings.
3) Select Remote this shall open the following screen on the NRX.

4) Set The GPIB Adress which is configured in the communications tab of the advanced settings for the NRX.

This is seen in the image below.

The Rohde & Schwarz NRX device driver is a Power Meter which is supported by RadiMation^®.

This information about an equipment is automatically generated from the list of supported device drivers from RadiMation.

If you need more information you can contact radimation-support@raditeq.com.

@@ Line 1: / Line 1: @@
+ = How to configure the GPIB Adress for the R&S NRX =
+) Open the settings menu of the NRX.
+) Open the connection settings.
+) Select Remote this shall open the following screen on the NRX.
+[[File:NRX-GPIB.jpg]]
+) Set The GPIB Adress which is configured in the communications tab of the advanced settings for the NRX.
+	This is seen in the image below.
+[[File:NRX-AdvancedSettingsGPIB.PNG]]
 {{DeviceDriverInfo
 |DLLFile=RSPOWER.DLL