All public logs
Jump to navigation
Jump to search
Combined display of all available logs of RadiWiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 07:29, 3 November 2025 Joro talk contribs created page File:ConfigurableSwitchMatrixCustom1 HighFreq.png (== Summary == Shows the {{ScreenElement|Custom 1}} tab of the Configurable Switch Matrix, showing the basic settings configurable device driver. Also the 'HIGH_FREQ_AMP' command for 'During Test' is listed, as this screenshot is used in RadiMation Application Note 167 Category:Screenshot)
- 07:29, 3 November 2025 Joro talk contribs uploaded File:ConfigurableSwitchMatrixCustom1 HighFreq.png (== Summary == Shows the {{ScreenElement|Custom 1}} tab of the Configurable Switch Matrix, showing the basic settings configurable device driver. Also the 'HIGH_FREQ_AMP' command for 'During Test' is listed, as this screenshot is used in RadiMation Application Note 167 Category:Screenshot)
- 07:28, 3 November 2025 Joro talk contribs moved page File:ConfigurableSwitchMatrixCustom1.png to File:ConfigurableSwitchMatrixCustom1 LowFreq.png without leaving a redirect
- 07:26, 3 November 2025 Joro talk contribs created page File:ConfigurableSwitchMatrixCustom1.png (Shows the {{ScreenElement|Custom 1}} tab of the Configurable Switch Matrix, showing the basic settings configurable device driver. Also the 'LOW_FREQ_AMP' command for 'During Test' is listed, as this screenshot is used in RadiMation Application Note 167 Category:Screenshot)
- 07:26, 3 November 2025 Joro talk contribs uploaded File:ConfigurableSwitchMatrixCustom1.png (Shows the {{ScreenElement|Custom 1}} tab of the Configurable Switch Matrix, showing the basic settings configurable device driver. Also the 'LOW_FREQ_AMP' command for 'During Test' is listed, as this screenshot is used in RadiMation Application Note 167 Category:Screenshot)
- 07:23, 3 November 2025 Joro talk contribs created page File:ConfigurableSwitchMatrixRS232Settings.png (Shows the {{ScreenElement|Communication}} tab of the Configurable Switch Matrix, showing the settings of the RS-232 communication stream Category:Screenshot)
- 07:23, 3 November 2025 Joro talk contribs uploaded File:ConfigurableSwitchMatrixRS232Settings.png (Shows the {{ScreenElement|Communication}} tab of the Configurable Switch Matrix, showing the settings of the RS-232 communication stream Category:Screenshot)
- 15:51, 31 October 2025 Joro talk contribs created page RadiMation Application Note 167 (Created page with "__NOTOC__ = Controlling a custom Arduino relay device via the Configurable Switch Matrix driver = This application note explains how a user-made Arduino device that controls a relay can be operated directly from {{RadiMation}} by using the Configurable Switch Matrix device driver. By configuring the correct serial communication and defining the proper commands, it is possible to automatically switch between a low-frequency and a high-frequency amplifier within the...")
- 12:48, 31 October 2025 Jeru talk contribs created page RadiMation Error: 805354071 (Created page with "= The movement to the requested position did not start. = The movement requested from the positioner did not start. == Solution == * Check if nothing is blocking the movement of the device. * Check if additional requirements in order to control the device are met. Such as for example referencing the positioner. Category:RadiMation Error Category:RadiMation")
- 12:47, 31 October 2025 Jeru talk contribs created page RadiMation Error: 805373169 (Created page with "= The movement to the requested height did not start. = The movement requested from the antenna tower did not start. == Solution == * Check if nothing is blocking the movement of the device. * Check if additional requirements in order to control the device are met. Such as for example referencing the antenna tower. Category:RadiMation Error Category:RadiMation")
- 12:46, 31 October 2025 Jeru talk contribs created page RadiMation Error: 805373269 (Created page with "= The movement to the requested position did not start = The movement requested from the positioner did not start. == Solution == * Check if nothing is blocking the movement of the device. * Check if additional requirements in order to control the device are met. Such as for example referencing the positioner. Category:RadiMation Error Category:RadiMation")
- 11:42, 31 October 2025 Joro talk contribs created page AIM 7351731 (Created page with "__NOTOC__ = AIM 7351731 = == Scope and Purpose == The AIM 7351731 standard provides test methods and test levels for evaluating the electromagnetic immunity of (non-implantable) medical electrical equipment and systems when exposed to electromagnetic emissions from radio-frequency identification (RFID) readers. The standard focuses on the most common RFID technologies currently deployed in health...")
- 11:13, 28 October 2025 Joro talk contribs created page RadiMation Application Note 166 (Created page with "= RadiMation Application Note 139: Radiated Emission GTEM Measurement = == Introduction == This application note describes how a radiated emission test can be performed in a GTEM (Gigahertz Transverse Electromagnetic) cell using the {{RadiMation}} software. It explains the practical configuration steps in {{RadiMation}}, and also the basic theory behind the GTEM concept and the OATS (Open Area Test Site) correlation. Radiated emission testing is normally performed...")
- 13:15, 24 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.24.1415 (Initial Release_Notes/Drivers_Version_2025.10.24.1415 page creation)
- 14:29, 14 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.14.1612 (Initial Release_Notes/Drivers_Version_2025.10.14.1612 page creation)
- 01:06, 14 October 2025 DevicesBot talk contribs created page ETS-Lindgren EMSense 7007-301 (Initial DeviceDriverInfo page creation)
- 01:04, 14 October 2025 DevicesBot talk contribs created page Rohde & Schwarz NRP67SN (Initial DeviceDriverInfo page creation)
- 01:04, 14 October 2025 DevicesBot talk contribs created page Rohde & Schwarz NRP67S (Initial DeviceDriverInfo page creation)
- 15:37, 13 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.13.1650 (Initial Release_Notes/Drivers_Version_2025.10.13.1650 page creation)
- 08:10, 13 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.13.1006 (Initial Release_Notes/Drivers_Version_2025.10.13.1006 page creation)
- 11:11, 8 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.08.0831 (Initial Release_Notes/Drivers_Version_2025.10.08.0831 page creation)
- 10:21, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372575 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of pressure is higher than the configured maximum environmental limit. This error indicates that the measured pressure value from the Netatmo environmental sensor exceeds the configured maximum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog: ''Envi...")
- 10:20, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372576 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of pressure is lower than the configured minimum environmental limit. This error indicates that the measured pressure value from the Netatmo environmental sensor is below the configured minimum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog: ''Envi...")
- 10:19, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372571 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of humidity is higher than the configured maximum environmental limit. This error indicates that the measured humidity value from the Netatmo environmental sensor exceeds the configured maximum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog: ''Envi...")
- 10:18, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372572 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of humidity is lower than the configured minimum environmental limit. This error indicates that the measured humidity value from the Netatmo environmental sensor is below the configured minimum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog: ''Envi...")
- 10:17, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372574 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of temperature is lower than the configured minimum environmental limit. This error indicates that the measured temperature value from the Netatmo environmental sensor is below the configured minimum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog:...")
- 10:13, 7 October 2025 Voko talk contribs created page RadiMation Error: 805372573 (Created page with "= Netatmo Environmental Data Provider: Environmental Limits Error = '''Netatmo environmental data provider:''' The measured value of temperature is higher than the configured maximum environmental limit. This error indicates that the measured temperature value from the Netatmo environmental sensor exceeds the configured maximum environmental limit. == Configuration == This setting can be verified or adjusted in the device driver '''Advanced''' configuration dialog:...")
- 13:43, 1 October 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.10.01.1538 (Initial Release_Notes/Drivers_Version_2025.10.01.1538 page creation)
- 13:39, 1 October 2025 Jeru talk contribs created page Release Notes/Solved items Version 2025.1.4 (Created page with "== RadiMation version x.y.z == * #8655: GTEM correlation graph is now also shown when an ambient suppression line is present * #9118: GTEM correlation is now also calculated when ambient suppression is present in multiband emission GTEM test * #10837: Multiband GTEM is now quicker as x y z position has not to be rotated many times * #15027: Final measurement of GTEM Peaks is optimised to measure all frequencies of a given axis first * #15258: Placing of the EUT in the GT...")
- 01:08, 27 September 2025 DevicesBot talk contribs created page Narda EMD-100 (Initial DeviceDriverInfo page creation)
- 08:11, 26 September 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.09.26.0855 (Initial Release_Notes/Drivers_Version_2025.09.26.0855 page creation)
- 12:10, 24 September 2025 Roge talk contribs created page File:CI injection device.png
- 12:10, 24 September 2025 Roge talk contribs uploaded File:CI injection device.png
- 13:42, 19 September 2025 Naka talk contribs created page UI.Graphs.Highlight.BringToFront (Create page for Creating UI.Graphs.Highlight.BringToFront)
- 11:56, 18 September 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.09.18.1339 (Initial Release_Notes/Drivers_Version_2025.09.18.1339 page creation)
- 15:45, 16 September 2025 Jeru talk contribs created page Release Notes/Solved items Version 2025.1.3 (Created page with "* #7078: Dialogs are now always shown on the same screen where RadiMation is open * #12906: Newly added rows to the correction file will contain the next logical frequency * #16111: Improvements relation the correction file UI * #16168: Remove the initial row from the correction file when data is pasted * #16176: The position of the external RadiMation windows is saved and restored the next time they are opened * #16194: Always display newly opened windows fully within t...")
- 11:25, 11 September 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.09.11.1321 (Initial Release_Notes/Drivers_Version_2025.09.11.1321 page creation)
- 12:39, 10 September 2025 DevicesBot talk contribs created page Release Notes/Drivers Version 2025.09.10.1341 (Initial Release_Notes/Drivers_Version_2025.09.10.1341 page creation)
- 12:33, 10 September 2025 Joro talk contribs created page RadiMation Error: 805351476 (Created page with "= The Average detector can only be used if it is the only active detector. Disable other detectors = For the Rohde & Schwarz spectrum analyser, multiple trace detectors are activated, one of them being the average detector. The average detector can however only be used during the prescan if it is the only detector. == Solution == * Disable the average detector during the prescan. * Disable all the other detectors (and only enable the average detector) during the prescan...")
- 11:28, 10 September 2025 Roge talk contribs created page File:CI EUT test result.png
- 11:28, 10 September 2025 Roge talk contribs uploaded File:CI EUT test result.png
- 07:18, 10 September 2025 Roge talk contribs created page File:CI EUT modulation setup.png
- 07:18, 10 September 2025 Roge talk contribs uploaded File:CI EUT modulation setup.png
- 15:27, 9 September 2025 Roge talk contribs created page File:CI EUT test configuration.png
- 15:27, 9 September 2025 Roge talk contribs uploaded File:CI EUT test configuration.png
- 15:13, 9 September 2025 Roge talk contribs created page File:CI EUT test level setup.png
- 15:13, 9 September 2025 Roge talk contribs uploaded File:CI EUT test level setup.png
- 14:50, 9 September 2025 Roge talk contribs created page File:CI EUT testing setup.png
- 14:50, 9 September 2025 Roge talk contribs uploaded File:CI EUT testing setup.png
- 14:27, 9 September 2025 Roge talk contribs uploaded a new version of File:CI Calibration setup.png
