Immunity.Regulation.MaximumStep

This advanced option specifies the maximum change (in dB) that will be taken with the carrier level of the signal generator in a single carrier level change going up during the regulation to the desired power in a immunity test.

By default this value is set to 5 dB.

There are other advanced options available that are related to the regulation of the desired power in an immunity tests.

• Immunity.Regulation.PositiveTolerance
• Immunity.Regulation.NegativeTolerance
• Immunity.Regulation.WarningNegative
• Immunity.Regulation.MinimumStep
• Immunity.Regulation.MaximumStep
• Immunity.Regulation.MaximumNegativeStep
• Immunity.Regulation.MaximumDirectionChangeCount
• Immunity.Regulation.CalculatedGain.Use
• Immunity.Regulation.CalculatedGain.Default
• Immunity.Regulation.CalculatedGain.Min
• Immunity.Regulation.CalculatedGain.Max
• Immunity.Regulation.CalculatedGain.UseDefault

Warning: Any change and/or modification to the advanced options, can result in unexpected results and/or incorrect measurement results. Changes in any advanced option should be verified and checked very carefully!